Macpherson Trade Vinyl Matt Paint - Brilliant White - 10L
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone looking to use Macpherson Trade Vinyl Matt paint for interior walls and ceilings. The primary benefit is a high-quality, flat matt finish that's also easy to clean. A key consideration is the need for proper surface preparation, especially on porous or powdery surfaces, to achieve the best results.
All features
| Colour | White |
|---|---|
| Brand | Macpherson |
Extended Product Information
FAQs
What surfaces can I use this paint on?
Macpherson Trade Vinyl Matt is suitable for interior walls and ceilings.
How many coats of paint do I need?
Generally, two coats are recommended for optimal coverage and finish.
How long should I wait between coats?
Allow 4 hours between coats.
How should I clean the surface before painting?
Clean the surface with a suitable cleaning agent to remove dirt, grease, and any loose particles. Ensure the surface is completely dry before painting.
Do I need to prime the surface?
If the surface is porous, apply a mist coat of Macpherson Trade Vinyl Matt thinned by 40% with water. For powdery surfaces, apply a Universal Primer first.
How do I clean the paint after it has dried?
You can gently spot-clean the surface with a damp cloth to remove any marks or stains.
What is the spreading rate of this paint?
Up to 15m2 - 16m2 per litre.
Troubleshooting
Paint appears patchy after application.
Ensure even application, adequate coverage, and proper surface preparation. Apply a second coat if necessary.
Paint is not adhering to the surface.
Ensure the surface is clean, dry, and primed if necessary. Lightly sand glossy surfaces to improve adhesion.
Pros and Cons
Pros
- Easy to apply with a brush, roller, or spray.
- Provides a fashionable, flat matt finish.
- Low odour and low VOC.
- Quick drying times.
- Can be spot-cleaned.
Cons
- Requires proper surface preparation.
- May require a mist coat on porous surfaces.
- May require a primer on powdery surfaces.
Setup, Compatibility & Care
- Surface Preparation: Ensure the surface is clean, dry, and free from loose particles.
- Priming: For porous surfaces, apply a mist coat of Macpherson Trade Vinyl Matt thinned by 40% with water. For powdery surfaces, use a Universal Primer.
- Application: Apply two coats of Macpherson Trade Vinyl Matt using a brush, roller, or spray. Allow 4 hours between coats.
- Drying: The paint will be touch dry in 2 hours and ready for recoating after 4 hours.
Compatibility:
This paint is compatible with a wide range of interior surfaces, provided they are properly prepared.
Care:
Clean any spills immediately. The surface can be gently spot-cleaned when needed.