Nuie Arno Wall Hung Single Drawer Vanity Unit with Worktop - White

Currently unavailable

Currently unavailable
The Nuie Arno Wall Hung Single Drawer Vanity Unit with Worktop in Gloss White is designed for homeowners seeking a modern, space-saving bathroom solution. Its primary benefit is enhancing the perception of space with its wall-hung design, while the soft-close drawer offers convenient and quiet storage. A key consideration is that vessel basins and waste fittings are sold separately, requiring additional purchases.
| Colour | White |
|---|---|
| Model Part Number | ARN125W |
| Brand | Nuie |
This vanity unit is designed to be used with a vessel basin, which sits on top of the included worktop.
No, taps and waste fittings are not included. These must be purchased separately and should be compatible with your chosen vessel basin and the unit's worktop.
The Nuie Arno Vanity Unit comes with a 5-year manufacturer's guarantee against faulty workmanship or materials.
Clean the gloss white finish using a soft, damp cloth. Avoid abrasive cleaners or scouring pads to prevent scratching or damage.
The dimensions are Height: 377.0 mm, Width: 805.0 mm, and Depth: 390.0 mm. For exact measurements, please refer to the product's line drawing.
The unit is supplied assembled, but it requires wall mounting and installation of the basin and plumbing. Please refer to the installation guide for detailed steps.
No, this unit is specifically designed with a worktop intended for vessel basins which sit on top, not inset basins.
Check for any obstructions in the drawer runners. Ensure the drawer is not overloaded. The runners may need minor adjustment; consult the installation manual.
Ensure all wall fixings are securely tightened. Verify that the correct type of wall anchors for your wall material were used during installation. Re-secure if necessary.
Wipe up spills immediately. If water marks persist, gently clean with a damp cloth and mild soap, then dry thoroughly. Avoid leaving wet items on the surface for extended periods.
Clean the surface with a damp, soft cloth. Avoid abrasive cleaners. A specialist furniture polish for gloss finishes may be used sparingly if needed.
Setup: This unit is designed for wall mounting. Ensure you have the appropriate wall fixings for your wall type (e.g., solid brick, plasterboard). The unit includes fittings, but wall anchors may need to be purchased separately depending on your wall construction. Always refer to the line drawing for precise measurements before drilling. The worktop is ready for a vessel basin; mark the position, cut the required aperture if necessary, and install the basin according to its manufacturer's instructions. Ensure all plumbing connections are secure and leak-free.
Compatibility: The unit is supplied with a worktop suitable for use with vessel basins. These basins sit on top of the worktop and are sold separately. You will also need to purchase a suitable waste and overflow kit and taps compatible with your chosen basin and worktop thickness.
Care: Clean the gloss white finish with a soft, damp cloth. Avoid abrasive cleaners, scouring pads, or harsh chemicals, as these can damage the surface. Wipe spills immediately to prevent staining. For the drawer runners, occasionally check for debris and clean with a dry cloth if necessary.