Deco Art Aqua Waters Maxx Gloss Acrylic Paint - 8 oz
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Deco Art Aqua Waters Maxx Gloss Acrylic Paint is designed for DIY enthusiasts and crafters seeking a superior, high-gloss, glass-like finish for furniture and decor. Its key benefit is the ease of achieving a professional, sleek look with a water-based, brush-on formula that requires no priming or sanding on most surfaces. A potential caveat is that full coverage, the most durable finish, is typically achieved in two coats.
All features
| Model Part Number | ADMG12-36 |
|---|---|
| Brand | DecoArt |
Extended Product Information
FAQs
Do I really need to skip priming and sanding?
For most smooth, coated surfaces, priming and sanding are not necessary. However, if you are painting on a very porous, rough, or unsealed surface, preparation might be beneficial for optimal adhesion.
How many coats are recommended?
Full coverage and the most durable finish are typically achieved in two coats. However, depending on the surface color and desired opacity, you may need more or fewer coats.
How long does it take to fully cure?
The paint is dry to the touch within 1-2 hours between coats. However, it takes approximately 72 hours after the final coat for the finish to fully cure and become resistant to household cleaning chemicals.
Can I use this on outdoor furniture?
While the finish is fade resistant, it is primarily designed for indoor use and resistance to household chemicals. For outdoor items, consider a product specifically formulated for exterior durability and weather resistance.
How do I clean my brushes after use?
Clean brushes immediately after use with soap and warm water. Dried paint can be difficult to remove.
Can I mix this paint with other Deco Art paints?
Yes, the Deco Art Aqua Waters Maxx Gloss Acrylic Paint is intermixable with other Deco Art acrylic paints to create custom colors. Ensure they are of similar water-based formulations.
Is this paint suitable for high-traffic areas like tabletops?
The durable, hard finish once fully cured offers good resistance to household chemicals, making it suitable for surfaces like tabletops. However, for extremely high-traffic areas or surfaces prone to significant scratching, consider additional protective topcoats if recommended for your specific project.
Troubleshooting
Uneven or streaky finish
Ensure you are working with a thin, even coat and utilize the extended open time for proper leveling. Avoid over-brushing. Check that your brush is clean and soft.
Paint not adhering well
Confirm the surface is clean, dry, and smooth. For surfaces not listed as compatible or showing poor adhesion, consider light sanding or the use of a compatible primer specifically designed for glossy surfaces.
Bubbles or foam during application
Avoid over-agitating the paint. Apply in thin coats. If bubbles occur, gently smooth them out during application while the paint is still wet.
Surface is tacky after several days
The paint may not be fully cured. Ensure application in a well-ventilated area at a moderate temperature. Avoid heavy use or cleaning until the full 72-hour cure time is met.
Pros and Cons
Pros
- Achieves a professional, high-gloss, glass-like finish.
- Saves time with no need for priming or sanding on many surfaces.
- Excellent adhesion properties ensure durability.
- Provides a smooth, even finish due to extended open time.
- Water-based and non-toxic for safer crafting.
Cons
- Full coverage and maximum durability typically require two coats.
- Adhesion effectiveness may vary on highly textured or unsealed surfaces.
- As with any gloss finish, surface imperfections may be more noticeable.
- Curing time is required for full resistance to household chemicals.
Setup, Compatibility & Care
Setup: Ensure the surface to be painted is clean and dry. For most smooth, coated surfaces, no priming or sanding is required. Shake the paint well before use. Apply with a soft brush, working in thin, even coats.
Compatibility: This paint adheres well to most smooth, previously finished surfaces, including wood, metal, laminate, and properly prepped plastic. It is not recommended for use on unfinished porous surfaces without proper sealing or on flexible materials where cracking might occur.
Care: For best results, allow the paint to dry to the touch between coats (usually 1-2 hours). For full curing and maximum resistance to household chemicals, allow 72 hours after the final coat. Clean brushes and tools immediately after use with soap and water. Once fully cured, the finish can be cleaned with a damp cloth and mild soap if necessary. Avoid abrasive cleaners.