Big Boy Metal Filler High Temp - Silverhook - BIG81
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is designed for users needing a high-temperature resistant metal filler, like automotive technicians or DIY enthusiasts working on exhaust systems or engine components. The Silverhook Big Boy Metal Filler offers excellent adhesion and flexibility, withstanding temperatures up to 200°C. Note that proper surface preparation is crucial for optimal results.
All features
| Model Part Number | BIG81 |
|---|---|
| Brand | Silverhook |
Extended Product Information
FAQs
What is the maximum temperature the filler can withstand?
The filler can withstand temperatures up to 200°C.
What surfaces can I apply this filler to?
You can apply it to bare steel, galvanized steel, and aluminum after appropriate preparation.
What sandpaper grit should I use?
Recommended sandpaper gradations are P80-P120.
Can I use this filler on exhaust systems?
Yes, it's ideal for exhaust systems due to its high-temperature resistance.
How should I store the product?
Store in a cool, dry place and ensure the container is tightly sealed.
Troubleshooting
Filler not adhering properly.
Ensure the surface is properly prepared, clean, and free from contaminants. Use the recommended sandpaper grit.
Filler cracking after application.
Ensure the filler is fully cured before exposing it to high temperatures. Apply in thin layers to avoid excessive thickness.
Pros and Cons
Pros
- High temperature resistance for demanding applications.
- Excellent adhesion to various metals.
- Good flexibility to prevent cracking.
- Suitable for pre-powder coating surface treatment.
Cons
- Requires proper surface preparation for optimal results.
- Sandpaper gradations must be followed for best finish.
Setup, Compatibility & Care
- Surface Preparation: Clean the surface thoroughly and remove any rust, oil, or loose particles.
- Sanding: Use P80-P120 sandpaper for optimal results.
- Application: Mix the two components as per the instructions.
- Application method: Apply the mixture evenly to the damaged area.
- Curing: Allow the filler to cure completely according to the manufacturer's instructions before exposing it to heat or stress.
Compatibility: Compatible with bare steel, galvanized steel, and aluminum.
Care: Store in a cool, dry place. Ensure the container is tightly sealed when not in use. Clean tools immediately after use.