Bathroom Splashback - Warren Reed - Designer
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Warren Reed Designer Bathroom Splashback is for homeowners looking to add a touch of modern elegance and practicality to their bathroom. Its key benefit is providing a stylish, hygienic, and low-maintenance alternative to traditional tiles, eliminating grout lines. A potential caveat is its specific size (W600mm x H250mm), which may require careful placement.
All features
| Model Part Number | 5056782157444 |
|---|---|
| Brand | Warren Reed - Designer |
Extended Product Information
FAQs
What material is the splashback made from?
The splashback is made from 6mm toughened safety glass.
Does it come with adhesive?
No, adhesive is not included with the splashback. A suitable silicone or mirror adhesive should be purchased separately.
How do I clean the splashback?
Clean with a soft, damp cloth using warm, soapy water. Avoid abrasive cleaners.
Can I drill holes in the splashback?
No, the splashback is designed for adhesive installation and should not be drilled, as this can compromise the safety glass.
What are the dimensions of the splashback?
The dimensions are W600mm x H250mm.
Is this splashback suitable for a shower area?
This splashback is designed for bathroom environments like behind basins. It is moisture resistant but not intended for direct, constant water exposure like in a shower enclosure.
How is the print applied to the glass?
The splashback features a high-quality print applied to the glass, designed to be durable and easy to clean.
Troubleshooting
Splashback is not adhering to the wall
Ensure the wall surface was thoroughly cleaned and dried before adhesive application. Check that the correct type and sufficient quantity of adhesive were used, and allow adequate curing time as per adhesive instructions.
Streaks or smudges on the glass after cleaning
Use a soft, lint-free cloth and a mild, non-abrasive cleaning solution like warm, soapy water. Dry immediately with a clean, dry lint-free cloth to prevent water spots.
Adhesive is visible around the edges
Carefully wipe away excess adhesive immediately after installation before it cures. If cured, it may require careful scraping with a plastic scraper or professional removal.
Pros and Cons
Pros
- Modern and elegant design
- Hygienic and easy to clean
- Durable and long-lasting construction
- Simple installation without drilling
- Moisture and stain-resistant properties
Cons
- Fixed size (W600mm x H250mm) may not fit all spaces
- Requires adhesive for installation (not included)
- Not suitable for areas directly exposed to high-impact splashes
- Print design is fixed and not customizable
Setup, Compatibility & Care
Setup:
- Ensure the wall surface behind the basin is clean, dry, and free from dust or grease.
- Position the splashback to ensure it is level and correctly aligned.
- Apply a suitable silicone adhesive or mirror adhesive (not included) to the back of the splashback according to the adhesive manufacturer's instructions.
- Firmly press the splashback onto the wall.
- Follow adhesive instructions for curing times before exposing to moisture.
Compatibility:
This splashback is designed to be installed behind bathroom basins on a flat, stable wall surface. It is compatible with most standard basin and vanity setups. Ensure the wall can support the weight of the glass.
Care:
Clean the splashback regularly using a soft, damp cloth with warm, soapy water. Avoid abrasive cleaners or scouring pads, which can scratch the glass surface. Rinse with clean water and dry with a lint-free cloth for a streak-free finish.