AVA Easy P57 Medium Pressure Washer - 145 Bar - 500L/h - 2100W - 12m Hose - Grey

Not Available AVA Easy P57 Medium Pressure Washer - 145 Bar - 500L/h - 2100W - 12m Hose - Grey

The AVA Easy P57 Medium Pressure Washer is a powerful tool designed for efficient outdoor and vehi...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Similar alternatives

Karcher K 7 WCM Flex Eco!Booster Pressure Washer - 180 BarFrom £399View product

Kärcher K 5 Classic Pressure Washer - 145 bar, 2100WFrom £200View product

Karcher K 5 WCM Flex Eco Booster Pressure Washer - Yellow - Car & HomeFrom £291View product

Ryobi 18V ONE+™ 22bar Cordless Power Washer KitFrom £150View product

Product Information

Full details

The AVA Easy P57 Medium Pressure Washer is an ideal choice for homeowners seeking a reliable, high-performance solution for vehicle detailing, patio cleaning, and general outdoor maintenance. Driven by a robust 2100W motor and a durable V3 metal pump, it delivers 145 bar of pressure to tackle tough grime, though users should note that its powerful output requires careful handling on delicate surfaces to avoid potential damage.

All features

Colour	Grey
Model Part Number	P57
Brand	AVA
Options	145 Bar, 500L/h, 2100W, 12m Hose

Extended Product Information

FAQs

Can I use this pressure washer with hot water?

The AVA P57 is designed for cold water use. Using water that exceeds the manufacturer's temperature limit can damage the pump seals.

How long is the power cable?

The unit comes with a standard length power cord designed for residential outdoor outlets. Ensure you use a weather-rated extension lead if required.

Is the lance adjustable?

Yes, the included Zoom Lance can be adjusted to different lengths to accommodate your reach requirements.

What should I do if the unit won't turn on?

Verify that the power plug is securely connected and check your home's circuit breaker to ensure the outlet has power.

Can I add detergent to the machine?

The P57 system is compatible with various AVA detergent foam cannons that attach directly to the gun for easy soap application.

How do I clean the nozzle?

Use a small cleaning needle or a thin wire to gently remove any debris lodged in the nozzle tip.

Troubleshooting

Machine hums but does not produce pressure

Ensure the water supply is fully turned on and check that the hose is not kinked. Bleed the air from the system by holding the trigger down for 30 seconds before switching the power on.

Pressure fluctuates during use

Check the water filter for blockages and ensure the nozzle tip is clean and free of debris.

Pros and Cons

Pros

High-quality V3 metal pump construction
Generous 12-meter hose length for excellent reach
Ergonomic PG3 Zero-Force trigger design
Powerful 145 bar output suitable for varied cleaning tasks
Comprehensive accessory bundle included

Cons

Higher pressure may be too aggressive for soft wood or delicate paint if used incorrectly
Heavier build compared to entry-level plastic pump models
Requires a stable water source and power outlet proximity

Setup, Compatibility & Care

To set up the unit, ensure the water filter is properly installed at the inlet before connecting your garden hose. Always bleed the system by holding the trigger on the gun while the machine is off, allowing water to flow through until the air is purged; this prevents 'dry firing' and protects the pump.

Maintenance Tips:

Always drain the remaining water from the hose and pump before storing in freezing temperatures.
Regularly rinse the water inlet filter to ensure optimal flow.
Use the Turbo nozzle sparingly on painted surfaces, as the rotating action is designed for hard materials like concrete or stone.