Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
This guide is for homeowners looking to add a sophisticated and practical element to their kitchen. The Warren Reed Splendid Stag Watercolour Premium Glass Kitchen Splashback offers a stunning visual upgrade and easy maintenance, transforming your cooking space. A key consideration is the requirement for specific adhesive during installation.
| Model Part Number | WR00265-P448 |
|---|---|
| Brand | Warren Reed |
You must use Clear Natural Curing Adhesive specifically designed for glass splashbacks. Always follow the adhesive manufacturer's instructions.
The splashback is pre-cut to the specified sizes. Cutting toughened glass requires specialized equipment and expertise and is not recommended for DIY installation. It is best to order the size that fits your space.
Clean with a soft, damp cloth and a mild, non-abrasive kitchen cleaner. Avoid abrasive materials and harsh chemicals to prevent scratching the glass or damaging the print.
Yes, the splashback is made from 6mm toughened glass, which offers good heat resistance for typical kitchen use behind hobs. However, avoid direct, prolonged exposure to extremely high heat sources.
The available sizes are W600mm x H750mm, W700mm x H750mm, W900mm x H750mm, W600mm x H600mm, W600mm x H650mm, W700mm x H650mm, and W900mm x H650mm.
It is best to install the splashback on a clean, smooth, and flat wall. Installing over textured tiles might compromise adhesion and create an uneven finish. Removing existing tiles or preparing the surface to be perfectly flat is recommended.
Ensure you are using the recommended Clear Natural Curing Adhesive. Check that the wall surface is dry and free from dust or grease. Monitor ambient temperature and humidity, as these can affect curing times.
Use only soft cloths and non-abrasive cleaners. For minor marks, try a mixture of water and white vinegar. Avoid using abrasive materials or harsh chemicals.
This is usually due to uneven wall preparation or adhesive application. Ensure the wall is perfectly flat and that adhesive is applied evenly. Minor imperfections may be difficult to correct once the adhesive has cured.
This may indicate damage from harsh cleaning agents. Ensure only recommended cleaning methods are used. For significant damage, replacement of the splashback may be necessary.
Setup:
Installation requires careful preparation of the wall surface to ensure it is clean, dry, and smooth. It is crucial to use Clear Natural Curing Adhesive specifically recommended for glass splashbacks. Follow the adhesive manufacturer's instructions for application and curing times. Ensure accurate measurements are taken before attempting to fit the splashback. Professional installation is recommended due to the weight and fragility of glass.
Compatibility:
This splashback is designed for use in kitchens, particularly behind hobs, sinks, and countertops. It is compatible with most standard kitchen backsplashes and wall types, provided the wall is structurally sound and prepared correctly for adhesive application. Ensure adequate ventilation in the kitchen during and after installation as per adhesive guidelines.
Care:
To maintain the pristine appearance of your glass splashback, clean regularly with a soft, damp cloth and a mild, non-abrasive kitchen cleaner. Avoid using harsh chemicals, abrasive pads, or scouring agents, as these can scratch or damage the glass surface and the printed design. For stubborn marks, a mixture of water and white vinegar can be effective, followed by a clean, dry cloth.
