Seamlessly integrate your eufy NVR PoE System with eufy battery Wi-Fi cameras and sensors for comp...Seamlessly integrate your eufy NVR PoE System with eufy battery Wi-Fi cameras and sensors for comprehensive home and business security. This module allows unified management and recording of up to 16 Wi-Fi cameras and 32 sensors through one NVR, simplifying security across multiple networks and large areas. Unlock advanced NVR features for your Wi-Fi cameras, including smart video search, local storage, enhanced AI recognition, and app/web control. Enjoy plug-and-play simplicity with no complicated configuration needed. Effortlessly migrate existing Wi-Fi cameras from HomeBase 3 or HomeBase 2 to the NVR with the one-click migration feature, without needing to re-pair or reset devices. Ensure your NVR firmware is V1.3.1.8 or above and your App version is App V6.0.00 or above. Note: Allow a few minutes for the module to complete updates until the status light turns solid blue before pairing devices for the first time.
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
The eufy Wi-Fi Module (T8771) is designed for eufy users who want to centralize their security system, allowing management of up to 16 Wi-Fi cameras and 32 sensors through a single NVR. Its key benefit is unlocking advanced NVR features for your existing Wi-Fi cameras, such as smart search and local storage. A caveat is that it requires specific firmware and app versions for full functionality.
All features
Model Part Number
T8771
Brand
Eufy
Extended Product Information
FAQs
What is the maximum number of cameras and sensors this module supports?
The module allows unified management and recording of up to 16 Wi-Fi cameras and 32 sensors through one NVR.
Can I use this module with non-eufy cameras?
No, this module is designed specifically for eufy battery Wi-Fi cameras and sensors.
Do I need a cloud subscription for local storage?
No, the NVR provides local storage, which does not require a cloud subscription.
How long does the initial update take after installing the module?
The initial update usually takes a few minutes until the status light turns solid blue. Please wait patiently for this process to complete before pairing devices.
What firmware versions are required for the NVR and App?
You need NVR firmware V1.3.1.8 or above and App version V6.0.00 or above.
Can I migrate cameras from HomeBase 3 to the NVR using this module?
Yes, the module features a one-click migration function to effortlessly transfer existing Wi-Fi cameras from HomeBase 3 or HomeBase 2 to the NVR.
What happens if I try to add cameras before the module's update is complete?
Device pairing will not be successful until the module's update is complete and the status light is solid blue. Attempting to pair too early may lead to connection issues.
Troubleshooting
Module not detected by NVR
Ensure the NVR firmware and App are updated to the required versions. Power cycle the NVR and re-insert the module. Check for any physical damage to the module or NVR slot.
Status light remains flashing after installation
Allow several minutes for the module to complete its initial update. If the light continues to flash, try power cycling the NVR and re-inserting the module. Contact eufy support if the issue persists.
Wi-Fi cameras cannot be added
Verify that the cameras are compatible eufy Wi-Fi models and are within range of the NVR. Ensure the NVR and App versions meet the minimum requirements. Try resetting the camera to factory settings and re-adding it.
One-click migration fails
Confirm that both the source HomeBase and the target NVR have the necessary firmware updates. Ensure the camera is properly connected to the source HomeBase before initiating migration. Restart both devices and try again.
Pros and Cons
Pros
Centralizes management of multiple eufy devices
Adds advanced NVR features to Wi-Fi cameras
Easy migration of existing cameras
Plug-and-play setup simplifies installation
Provides local storage options for privacy and control
Cons
Requires specific NVR and App firmware versions
Only compatible with eufy Wi-Fi cameras and sensors
Initial setup may require firmware updates, causing a brief delay
Setup, Compatibility & Care
Setup:
Ensure your eufy NVR firmware is updated to V1.3.1.8 or above, and your eufy app is at version V6.0.00 or above.
Install the eufy Wi-Fi Module into the designated slot on your NVR.
Power on the NVR. The module will undergo an initial update, indicated by a flashing status light. Wait until the light turns solid blue before proceeding.
Follow the on-screen prompts in the eufy app or on the NVR interface to add your Wi-Fi cameras and sensors.
Compatibility:
Compatible with eufy NVR PoE Systems.
Supports eufy battery Wi-Fi cameras and eufy sensors.
Requires specific firmware versions for NVR (V1.3.1.8+) and App (V6.0.00+).
Care:
Keep the module and NVR in a well-ventilated area to prevent overheating.
Clean the exterior of the NVR and module with a soft, dry cloth. Avoid using liquids or abrasive cleaners.
TP-Link PowerLine Network Adapter Kit - TL-WPA4220 KIT V4From £40View product 
TP-Link Powerline Extender - AV1000 Gigabit, AC1200 Wi-Fi - TL-WPA7617 (UK)From £60View product 
Powerline Adapter Kit - TP-Link TL-PA7017P KIT (UK)From £50View product 
TP-Link G.hn2400 Powerline AX1800 Wi-Fi 6 Kit - PGW2440 KIT (UK)From £130View product