Jump Leads - 2.5M - 200A - B&Q - Au230
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone who owns a car and wants to be prepared for unexpected battery issues. These B&Q Jump Leads are designed to help you jump-start your vehicle in an emergency. They are heavy-duty, tangle-free, and suitable for both petrol and diesel cars. Keep in mind that you'll need access to another vehicle with a working battery to use them.
All features
| Model Part Number | Au230 |
|---|---|
| Brand | B&Q |
Extended Product Information
FAQs
What vehicles are these jump leads suitable for?
These jump leads are suitable for petrol and diesel cars.
How long are the jump leads?
The jump leads are 2.5 meters long.
What is the amperage rating?
The amperage rating is 200 Amps.
What should I do if the car still won't start after jumping?
Make sure all connections are secure. The battery may be severely discharged and might need to be charged separately. The car's starting system might have another fault that needs professional attention.
Are these jump leads safe to use?
Yes, they are ROHS compliant and designed for safe use. Always follow the correct jump-starting procedure.
How do I store the jump leads?
Store the jump leads in a clean, dry place to prevent damage and corrosion.
Can I use these jump leads on a motorcycle?
The jump leads are primarily designed for cars. While they might work, consider the amperage and the specific requirements of the motorcycle.
Troubleshooting
Clamps won't make a secure connection.
Clean the battery terminals with a wire brush to remove corrosion. Ensure the clamps are fully open and gripping the terminals securely.
Car won't start after jump.
Check all connections to ensure they are secure and properly connected. Allow the donor car's engine to run for a longer period. The battery may be severely discharged and may need to be charged separately.
Jump leads get tangled easily.
Carefully coil the leads after each use to prevent tangling.
Pros and Cons
Pros
- Tangle-free design simplifies use.
- Suitable for both petrol and diesel vehicles.
- Heavy-duty clamps for a secure connection.
- 2.5-meter length offers good reach.
- ROHS Compliant for environmental safety.
Cons
- Requires access to another vehicle with a working battery.
- May not be suitable for very large vehicles or those with exceptionally high power demands.
Setup, Compatibility & Care
Setup
- Ensure both vehicles are turned off.
- Connect the red clamp to the positive (+) terminal of the dead battery.
- Connect the other red clamp to the positive (+) terminal of the working battery.
- Connect the black clamp to the negative (-) terminal of the working battery.
- Connect the remaining black clamp to a grounded, unpainted metal surface on the disabled vehicle (e.g., engine block).
- Start the working vehicle and let it run for a few minutes.
- Attempt to start the vehicle with the dead battery.
Compatibility
These jump leads are compatible with petrol and diesel cars. They are rated for 200 Amps, suitable for most vehicles.
Care
- Store the jump leads in a clean, dry place.
- Inspect the clamps and cables regularly for damage.
- Avoid twisting or kinking the cables.
- Clean the clamps if they become corroded.