Tikkurila Panssari Akva - Semi Matt Acrylic Paint for Metal & UPVC - 1L
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide provides essential information for users of Tikkurila Panssari Akva, a water-based acrylic paint designed for metal and UPVC surfaces. It's ideal for those seeking a durable, weather-resistant finish on cladding, sheet metal, and other factory-finished surfaces. While known for its excellent protection against the elements, remember that surface preparation is key to achieving optimal results.
All features
| Model Part Number | 444 6001 0130 |
|---|---|
| Brand | Tikkurila |
Extended Product Information
FAQs
What surfaces can I use Tikkurila Panssari Akva on?
It's suitable for metal and UPVC surfaces such as cladding, roof sheets, gutters, and drain pipes.
How do I apply the paint?
You can use a brush, roller, or spray.
How long does it take for the paint to dry?
It is touch dry in 1-2 hours and can be recoated after 24 hours.
Is Tikkurila Panssari Akva water-based?
Yes, it is a water-based acrylic paint.
Is any special surface preparation required?
Yes, ensure the surface is clean, dry, and free from loose particles.
What is the key benefit of this paint?
The key benefit is its excellent weather resistance and durability, protecting surfaces from the elements.
Can I use it on previously painted surfaces?
Yes, it is compatible with surfaces previously coated with alkyd or acrylic paints.
Troubleshooting
Paint is not adhering properly.
Ensure the surface is properly prepared. Clean and degrease the surface before application.
Color fading or discoloration.
Ensure the product is used in its intended application. Ensure surface is clean.
Paint appears to be cracking.
Ensure proper film thickness and allow sufficient drying time between coats.
Pros and Cons
Pros
- Durable and long-lasting protection.
- Excellent resistance to weather and UV exposure.
- Easy application with multiple methods.
- Compatible with a wide range of surfaces.
- Environmentally friendly water-based formula.
Cons
- Requires proper surface preparation for best results.
- Recoating requires a 24-hour waiting period.
- May require multiple coats for complete coverage depending on the surface.
Setup, Compatibility & Care
Setup
- Surface Preparation: Ensure the surface is clean, dry, and free from loose particles, rust, or previous coatings. Clean with a suitable cleaning agent.
- Application: Apply the paint using a brush, roller, or spray. Follow the manufacturer's instructions for the specific application method.
- Coating: Apply one or two coats, allowing 24 hours of drying time between coats.
Compatibility
Tikkurila Panssari Akva is compatible with:
- Surfaces previously coated with alkyd or acrylic paints.
- Factory-coated steel sheets (including PVC, PURAL, POLYESTER, PVDF, and Plastisol).
Care
- Clean up tools with water immediately after use.
- Allow the painted surface to fully cure before exposing it to heavy use or cleaning.
- Clean the painted surface with mild detergents and avoid abrasive cleaners.