Millers Oils DPF Turbo & Exhaust System Cleaner - 6x400ml

Millers Oils DPF Turbo & Exhaust System Cleaner is a high-performance diesel additive designed to ...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

Millers Oils DPF Turbo & Exhaust System Cleaner is designed for diesel vehicle owners looking to maintain engine performance and prevent costly exhaust system failures. By lowering the DPF regeneration temperature, this additive ensures efficient soot removal, helping to restore power and improve fuel economy. While it is highly effective at preventative maintenance and cleaning, it is important to note that it cannot reverse total mechanical failure or restore a DPF that is already completely blocked beyond the point of regeneration.

All features

BrandMillers Oils

Extended Product Information

FAQs

How often should I use this additive?

For preventative maintenance, it is recommended to use the product every 3,000 to 5,000 miles, or more frequently if you primarily drive in urban environments.

Can this be used in petrol engines?

No, this product is specifically formulated for diesel exhaust systems and DPF-equipped diesel engines.

Will this fix a completely blocked DPF?

If the DPF is blocked beyond the point where the engine computer can initiate a regeneration cycle, this additive may not be able to clear the obstruction.

Is it safe for all diesel engines?

It is safe for the majority of modern diesel engines, but always check your manufacturer's guidelines if your vehicle has specific additive requirements.

Does it improve fuel economy immediately?

While you may notice better responsiveness quickly, improvements in fuel economy are generally observed over a longer period of consistent use and engine efficiency.

Troubleshooting

DPF warning light remains on after treatment

The blockage may be too severe for chemical treatment. Seek professional diagnostic assistance to check if manual forced regeneration or replacement is required.

No noticeable change in engine performance

Ensure the product was used during a period of sustained driving rather than idling or stop-start city traffic.

Pros and Cons

Pros

  • Prevents premature DPF failure and expensive replacement costs
  • Easy to use; simply add to the fuel tank
  • Improves throttle response and engine power
  • Helps maintain compliance with emissions requirements
  • Suitable for a wide range of diesel engines

Cons

  • Not a permanent fix for physically broken or permanently clogged filters
  • Requires regular use for maximum long-term benefit
  • Best results are achieved during longer driving sessions
  • Each bottle must be measured carefully based on tank size

Setup, Compatibility & Care

To use the product, ensure your fuel tank is low enough to accommodate the additive, then pour the recommended amount into the filler neck before refueling to ensure proper mixing. Always consult your vehicle's owner manual to ensure compatibility with your specific diesel engine type, particularly those with advanced emission control systems. This product is intended for diesel engines only and should not be used in petrol vehicles. Store the bottles in a cool, dry place away from direct sunlight, and always keep the caps tightly sealed to prevent evaporation or contamination.