Frenchic Salt of the Earth Trim Paint 500ML - Beige
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Frenchic Salt of the Earth Trim Paint is ideal for DIY enthusiasts and homeowners looking to refresh interior woodwork, furniture, and radiators with a versatile, neutral shade. Its key benefit lies in its all-in-one formulation, saving time and effort by eliminating the need for separate primers and top coats. A potential caveat is that two coats are recommended for maximum durability, which affects the coverage per tin for a lasting finish.
All features
| Colour | Beige |
|---|---|
| Model Part Number | 39780695015511 |
| Brand | Frenchic |
Extended Product Information
FAQs
Do I need to use a primer with this paint?
No, Frenchic Salt of the Earth Trim Paint is self-priming, meaning it does not require a separate primer coat.
Do I need to use a top coat?
No, this paint is also self-sealing and does not require a separate top coat. It provides a durable, scuff-resistant finish on its own.
How much area does a 500ml tin cover?
A 500ml tin covers up to 7m² with a single coat. For a more durable finish, two coats are recommended, which will cover approximately 3.5m².
Can this paint be used on radiators?
Yes, it is suitable for use on powder-coated radiators, provided they are clean and cool before painting.
Is this paint safe for children's furniture?
Yes, it is EN71-3 certified, making it safe for use on children's toys and furniture.
What kind of finish does this paint have?
It provides a soft-satin sheen, which is a subtle, elegant finish.
How should I clean the painted surface?
Once fully cured, you can clean the surface with a damp cloth and mild soap if necessary. Avoid abrasive cleaners.
Troubleshooting
Paint not adhering well or peeling.
Ensure the surface was properly cleaned and dried before application. Remove any dust, grease, or old flaking paint. For difficult surfaces, a light keying (sanding) might be beneficial, though often not required.
Uneven finish or brush marks visible.
Stir the paint thoroughly before and during use. Apply thin, even coats. Use a high-quality brush or roller designed for water-based paints. Avoid overworking the paint. Ensure adequate drying time between coats.
Paint taking too long to dry.
Ensure application is in a well-ventilated area with moderate temperature and humidity. Avoid applying excessively thick coats. Very cold or humid conditions can significantly slow down drying times.
Scuff marks appearing soon after painting.
Ensure two coats have been applied and allowed to cure fully (up to 7 days). The paint achieves its maximum durability over time. Avoid heavy use or cleaning of the painted surface until fully cured.
Pros and Cons
Pros
- Saves time and effort with self-priming and self-sealing properties.
- Creates a durable, scuff-resistant finish ideal for high-traffic areas.
- Low VOC and low odour for a healthier and more pleasant painting experience.
- Excellent adhesion to a wide variety of surfaces without a separate primer.
- Safe for use on children's toys, meeting EN71-3 safety standards.
Cons
- Two coats are recommended for best durability, which means less coverage per tin than initially stated for a single coat.
- The soft-satin sheen may not be suitable for those preferring a high-gloss or matte finish.
- Water-based formulas can sometimes be less forgiving with drips than oil-based alternatives if not managed carefully.
- Requires proper drying time between coats for optimal adhesion and durability.
Setup, Compatibility & Care
Setup:
- Ensure the surface to be painted is clean, dry, and free from grease or dust. For previously painted surfaces, a light clean is usually sufficient.
- Stir the paint thoroughly before use.
- Apply a thin, even coat using a good quality brush or roller.
- Allow the first coat to dry completely. Drying times can vary based on humidity and temperature, but typically 1-2 hours.
- Apply a second coat for increased durability and a richer colour. Allow this coat to dry fully before use.
Compatibility:
- Wood: Suitable for bare, primed, or previously painted interior wood.
- Laminate: Adheres well to laminate surfaces.
- Metal: Can be used on metal, including powder-coated radiators (ensure they are clean and cool before painting).
- Furniture: Ideal for all types of furniture, including kitchen cupboards and built-in units.
- Toys: Certified safe for children's toys (EN71-3).
Care:
- Clean brushes and equipment immediately after use with water.
- The finish is robust and scuff-resistant once fully cured (typically 7 days).
- For cleaning painted surfaces, use a damp cloth and mild soap if necessary. Avoid abrasive cleaners.