Vent Hose for DELONGHI Air Conditioner - White - 04-SHD-892

Currently unavailable

Currently unavailable
This white Spares2Go Vent Hose is designed for Delonghi Air Conditioning Units, offering a 6-meter length with insulation to reduce noise and heat. It's ideal for users needing a replacement or extension for their AC unit's exhaust hose, ensuring efficient operation. A potential caveat is ensuring your unit has a 5-inch (125mm) outlet for compatibility.
| Colour | White |
|---|---|
| Model Part Number | 04-SHD-892 |
| Brand | Spares2Go |
The hose connection diameter is 125mm, which is equivalent to 5 inches.
The hose has an operational length of up to 6 meters.
No, this kit includes the insulated vent hose and 2 clamp clips only. A separate window kit or vent adapter may be required depending on your installation setup.
Yes, the hose can be cut to a shorter length if needed. However, ensure that the cut end is still able to be securely fastened to the appliance or vent.
This hose is designed for Delonghi air conditioners with a 5" (125mm) exhaust outlet. It may fit other brands if they use the same outlet size, but compatibility is not guaranteed.
The clamp clips are adjustable stainless steel bands that you tighten around the hose and the appliance/vent connection point to create a secure, airtight seal.
Ensure the clamp clip is the correct size for the connection point and tighten it firmly. Check that the hose is fully seated on the port before tightening.
Check for any kinks, sharp bends, or obstructions in the hose. Ensure there are no leaks at the connection points by checking the clamp clips.
While some heat transfer is normal, extreme heat may indicate a blockage or poor insulation. Inspect the insulation lining for damage. Ensure the ambient room temperature is within the AC unit's operating range.
Verify that the aluminum foil insulation is intact and properly positioned. Ensure the hose is not vibrating against any surfaces.
Setup:
Compatibility:
This hose is specifically designed for Delonghi air conditioning units with a 125mm (5") diameter exhaust outlet. While it is a universal fit for this size, always verify your specific model's requirements.
Care: