Magnusson Standard Socket - 24mm
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone using the Magnusson 24mm standard socket. It is designed to provide a reliable and durable solution for your mechanical tasks, thanks to its high-quality chrome vanadium steel construction. However, be aware that while robust, it's essential to use the correct size and apply appropriate torque to avoid damaging the socket or the fastener.
All features
| Brand | Magnusson |
|---|
Extended Product Information
FAQs
What is the material of the socket?
The socket is constructed from high-quality chrome vanadium steel (CRV).
What is the drive size of the socket?
The drive size is 1/2 inch.
What is the primary use of a 24mm socket?
A 24mm socket is used for tightening or loosening fasteners that require a 24mm socket.
How do I care for the socket?
Wipe the socket clean after each use, store it in a dry environment, and inspect it regularly for wear and tear.
Can I use this socket with an impact wrench?
This standard socket is not specifically designed for use with impact wrenches. Using it with an impact wrench might cause damage to the socket.
What should I do if the socket is stuck on a fastener?
Ensure the correct socket size is used. Apply penetrating oil to the fastener and try again, allowing the oil to soak in. Use a breaker bar to increase leverage.
What is the purpose of the satin finish?
The satin finish provides a better grip and resistance to corrosion.
Troubleshooting
Socket won't fit the fastener.
Ensure the correct size (24mm) is being used. Check for any obstructions or debris in the fastener or socket.
Socket slips or strips the fastener.
Ensure the socket is fully seated on the fastener. Apply even and controlled torque. If the fastener is heavily corroded, consider using a penetrating oil or a different method for removal.
Socket is difficult to remove from the ratchet.
Check the ratchet's release mechanism. Make sure the socket is properly aligned before attempting removal.
Pros and Cons
Pros
- Durable construction from chrome vanadium steel.
- Satin finish provides a secure grip.
- 12-point design for versatile use.
- Standard 24mm size for common applications.
- Compatible with a 1/2 inch drive for ease of use.
Cons
- Requires proper torque application to avoid damage.
- May require a breaker bar for heavily rusted or stubborn fasteners.
- Specific to 24mm fasteners, limiting its versatility without other sizes.
- Not suitable for impact wrench use.
Setup, Compatibility & Care
- Compatibility: The socket is designed for use with a 1/2 inch drive ratchet or extension. Ensure the drive size matches before use.
- Attaching the Socket: Simply attach the socket to the 1/2 inch drive ratchet or extension.
- Torque Application: Apply torque evenly and in a controlled manner.
- Care Instructions: After each use, wipe the socket clean to remove any debris or moisture. Store the socket in a clean and dry environment. Avoid using the socket on excessively rusted or corroded fasteners without proper preparation, as this can damage the socket.
- Inspection: Regularly inspect the socket for signs of wear and tear, such as cracks or deformation. Replace the socket if any damage is found.