BS Battery Smart Bank Battery Charger & Maintainer - 700547
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The BS Battery Smart Bank (700547) is an advanced charging solution tailored for automotive and powersports enthusiasts who need to maintain up to three batteries simultaneously. By automatically detecting battery chemistry and providing safe, multi-stage maintenance, it acts as a reliable 'connect and forget' tool for both lead-acid and lithium (LiFePO4) batteries. While it excels at keeping batteries conditioned and ready for use, users should note it is specifically optimized for batteries up to 40 Ah, making it ideal for motorcycles, ATVs, and small utility vehicles rather than large truck batteries.
All features
| Model Part Number | 700547 |
|---|---|
| Brand | BS Battery |
Extended Product Information
FAQs
Can I charge lead-acid and lithium batteries at the same time?
Yes, the BS Battery Smart Bank features individual detection for each channel, allowing you to mix chemistries across the three ports.
What is the maximum battery size I can charge?
This unit is designed for batteries up to 40 Ah.
Is it safe to leave the charger connected permanently?
Yes, it is designed for 'connect and forget' use, meaning it will safely maintain your batteries without overcharging them.
Does this charger have a memory function?
The charger automatically detects and adapts to the battery type connected to each port.
What should I do if the reverse polarity light flashes?
Disconnect the charger immediately and swap the connections so the red clamp is on the positive (+) terminal and the black clamp is on the negative (-) terminal.
Troubleshooting
Charger status lights do not illuminate
Verify that the power cable is firmly inserted into a live AC outlet.
Battery will not take a charge
Ensure the clamps are making clean contact with the battery terminals and that the battery capacity does not exceed 40 Ah.
Lithium battery does not wake up
Activate the Force Mode on the charger to signal the BMS inside the lithium battery.
Pros and Cons
Pros
- Simultaneous charging for up to 3 separate batteries
- Smart technology detects battery type automatically
- Integrated Force Mode to recover deeply discharged batteries
- Complete protection against sparks and polarity errors
- Compact and lightweight for convenient storage
Cons
- Limited to batteries up to 40 Ah capacity
- Not suitable for large-capacity vehicle batteries
- Requires proper terminal connections for each of the 3 channels
Setup, Compatibility & Care
- Setup: Connect the power lead to a standard wall outlet. Attach the battery leads to the positive and negative terminals of each battery being charged. Ensure the connections are firm.
- Compatibility: This device supports lead-acid (Wet, MF, AGM, Gel) and LiFePO4 batteries. It is strictly recommended for battery capacities up to 40 Ah.
- Care: Keep the unit in a well-ventilated, dry environment. Periodically wipe the charger housing with a dry cloth to prevent dust accumulation. Do not submerge the charger or cables in water. Inspect cables before every use to ensure there are no cracks, frays, or damaged insulation.