20x PRO Outdoor CT125 WF125 F Type Hex Crimp Connector - Loops - WF125
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for installers and DIY enthusiasts working with coaxial cable for outdoor or indoor applications. The Loops WF125 F-Type Hex Crimp Connector provides a durable, weatherproof connection for RG7 and similar coaxial cables, ensuring signal integrity. A key caveat is the specific tool requirement for proper installation.
All features
| Model Part Number | WF125 |
|---|---|
| Brand | Loops |
Extended Product Information
FAQs
What type of tool is needed for installation?
A hex crimp tool with a 9.5mm jaw size is required for proper installation of these WF125 connectors.
Can these connectors be used with RG6 cable?
No, these connectors are designed for larger coaxial cables like RG7 and CT125/WF125 (approx. 7-8mm outer diameter). RG6 cable is typically smaller and requires a different connector size.
Are these connectors reusable?
These are crimp-style connectors designed for a permanent, secure connection and are not intended for reuse once installed.
How does the connector ensure a weatherproof seal?
The connector features a rubber/plastic 'O' ring that seals around the cable's outer jacket, and the hex crimping process compresses the connector, creating a tight seal against environmental elements.
What is the diameter of the connector body?
The connector body has a diameter of 10.9mm.
What are the main components of this connector?
The connector has a 2-piece design, consisting of a main body and a separate central pin that is crimped onto the cable's conductor.
Troubleshooting
Connector does not crimp securely
Ensure you are using the correct hex crimp tool with the specified 9.5mm jaw size. Verify the cable diameter is within the compatible range (7-8mm).
Signal loss after installation
Check that the center pin is properly crimped to the conductor and makes contact. Ensure the braid is making good contact with the internal metal ring and that the dielectric is not pushing the braid away. Re-crimp or inspect cable preparation.
Water ingress into the connector
Confirm that the 'O' ring is properly seated and that the main body has been crimped securely. Ensure the cable jacket is undamaged and provides a good surface for the 'O' ring seal.
Difficulty inserting cable into connector
Ensure the cable preparation is clean and precise. Trim any stray braid strands and ensure the dielectric is flush. Do not force the cable; re-prepare the end if necessary.
Pros and Cons
Pros
- Provides a robust and weatherproof connection for coaxial cables.
- Pack of 20 offers good value for multiple installations.
- Designed for outdoor use, ensuring longevity in various environments.
- High-quality construction leads to reliable signal transmission.
- Secure crimp connection prevents signal loss or interference.
Cons
- Requires a specific hex crimp tool (9.5mm jaw size) for installation.
- Not suitable for smaller diameter coaxial cables.
- Installation process requires precise preparation of the cable.
- The 2-piece design might require careful handling during assembly.
Setup, Compatibility & Care
Compatibility: These connectors are designed for coaxial cables with an outer diameter of approximately 7-8mm, specifically compatible with RG7, CT125/WF125, and similar sized cables. The connector body has a diameter of 10.9mm.
Setup Instructions:
- Prepare the Cable: Using a coaxial cable stripper, prepare the cable end to expose the central conductor. Ensure the dielectric (insulator) is flush with the connector body's inner dimension.
- Install Center Pin: Crimp the supplied central pin onto the exposed central conductor using the appropriate crimp tool.
- Assemble Connector: Insert the prepared cable, with the crimped center pin, into the main connector body. The 'O' ring should create a seal around the cable's outer jacket, and the internal metal ring should contact the cable's braid.
- Crimp the Connector: Using a hex crimp tool with a 9.5mm jaw size, crimp the main body of the connector onto the cable. This action secures the connector and creates the weatherproof seal.
Care: These connectors are designed for a permanent installation. Once crimped, they should not be removed. For maintenance, ensure external cable entry points are sealed and protected. Due to their outdoor rating, they require minimal physical care, but periodic visual inspection for physical damage is recommended.