AB Tools Car Jump Leads Booster Cable - 3M Cable - Heavy Duty - 600amp
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
These heavy-duty 600 amp battery booster cables from AB Tools are designed for car owners needing a reliable jump start solution for petrol cars and diesels up to 2.0L. Offering a 3-meter cable length for flexibility and fully insulated, strong spring-loaded connectors for safety and secure grip, these leads provide a robust way to get your vehicle back on the road. A key caveat is their suitability for engines up to 2.0L, meaning larger diesel engines may require a higher amperage cable. They are supplied in a convenient zipped storage wallet.
All features
| Model Part Number | TE042 |
|---|---|
| Brand | AB Tools |
Extended Product Information
FAQs
What size engines are these jump leads suitable for?
These jump leads are rated for 600 amps and are suitable for all petrol cars and diesel engines up to 2.0 litres.
How long are the jump leads?
The total length of the cable for this pair of jump leads is 3 metres.
Are the connectors safe to use?
Yes, the connectors are fully insulated with a strong spring-loaded mechanism to ensure a secure grip and prevent accidental short circuits.
What material is the cable made of?
The cable is made of 9-gauge stranded copper for efficient current transfer.
Do these come with a storage case?
Yes, they are supplied in a zipped storage wallet for convenient and organized keeping.
Can I use these on a large diesel truck?
No, these leads are recommended for diesel engines up to 2.0 litres and may not be sufficient for larger engines or heavy-duty trucks.
How should I store the jump leads?
It is best to keep them clean and coiled neatly in the provided zipped storage wallet to prevent tangling and protect the cable and clamps from damage.
Troubleshooting
Jump leads do not start the car
Ensure the red clamps are securely attached to the positive (+) terminals and the black clamps are firmly connected to the negative (-) terminal and a grounding point. Verify that the assisting vehicle's engine is running and has been for a few minutes. Check that the engine size is within the specified limits (up to 2.0L diesel).
Sparks when connecting clamps
Minor sparks can occur when the final connection is made to the grounding point. If significant sparking occurs earlier, disconnect immediately and re-check clamp connections and polarity to ensure no accidental short circuits are happening.
Cable feels hot during use
This can indicate a poor connection or that the engine is drawing more current than the cables are rated for over an extended period. Disconnect immediately and check connections. If the engine is a larger diesel, consider if these leads are appropriate.
Pros and Cons
Pros
- Robust 600A rating suitable for common vehicle engines.
- Generous 3-meter cable length for versatile use.
- Safety features include fully insulated clamps.
- Durable construction with stranded copper cable.
- Comes with a convenient storage wallet.
Cons
- Limited to diesel engines up to 2.0 litres; may be insufficient for larger diesel engines.
- Not suitable for heavy-duty trucks or commercial vehicles.
- Requires careful connection to avoid damaging vehicle electronics.
Setup, Compatibility & Care
Compatibility: These leads are designed for use with 12-volt vehicle battery systems. They are suitable for all petrol engines and diesel engines up to 2.0 litres. Ensure the dead battery's voltage matches the voltage of the assisting vehicle's battery (typically 12V).
Setup (Jump Starting Procedure):
- Park Safely: Position the assisting vehicle close enough to the vehicle with the dead battery for the cables to reach, but ensure the vehicles are not touching.
- Turn Off Engines: Switch off both vehicles' ignitions and all electrical accessories.
- Connect Red Clamp: Attach one red clamp to the positive (+) terminal of the dead battery.
- Connect Other Red Clamp: Attach the other red clamp to the positive (+) terminal of the good battery.
- Connect Black Clamp: Attach one black clamp to the negative (-) terminal of the good battery.
- Connect Other Black Clamp: Attach the final black clamp to an unpainted metal surface on the engine block or chassis of the vehicle with the dead battery, away from the battery itself. This is a grounding point.
- Start Assisting Vehicle: Start the engine of the assisting vehicle and let it run for a few minutes.
- Start Vehicle with Dead Battery: Attempt to start the vehicle with the dead battery.
- Disconnect Cables: Once the engine is running, carefully remove the cables in the reverse order of connection: black from the chassis, black from the good battery, red from the good battery, and finally red from the previously dead battery.
Care: After use, clean the clamps of any dirt or corrosion. Store the cables neatly in the provided zipped wallet to prevent tangling and damage. Inspect the cables periodically for any signs of wear or damage. Keep the cables dry and away from excessive heat or chemicals.