Bosch Gas Hob - Silver - PCS7A5B90
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone looking to optimize their cooking experience with the Bosch PCS7A5B90 gas hob. It offers precise heat control with FlameSelect, a dual wok burner for versatile cooking, and a durable design. Be aware that professional installation is recommended due to gas connections.
All features
| Colour | Silver |
|---|---|
| Model Part Number | PCS7A5B90 |
| Brand | Bosch |
Extended Product Information
FAQs
How do I clean the hob?
Use a damp cloth and mild detergent to clean the surface. For tougher stains, use a non-abrasive cleaner. Clean the pan supports separately with warm, soapy water.
What type of gas can I use?
The hob is pre-set for natural gas. LPG jets are included for bottled gas.
What are the dimensions of the hob?
The dimensions are H 53 x W 750 x D 520mm. The required niche size is H 45 x W 560 x D (480-492mm).
What is FlameSelect?
FlameSelect allows you to precisely adjust the flame with nine defined power levels for perfect cooking results.
What should I do if the hob isn't working?
First, check the gas and power supply. If the issue persists, consult the troubleshooting section or contact a qualified technician.
Where are the controls located?
The control knobs are front-mounted, with integrated ignition for easy operation.
Troubleshooting
Hob doesn't ignite.
Check the gas supply and ensure the burner caps are correctly positioned. Also, make sure the power supply is connected.
Flame is too high or too low.
Adjust the flame level using the FlameSelect control. Ensure you're using the correct gas type and pressure.
Burner flame is uneven.
Clean the burner ports with a small brush or needle to remove any blockages.
Hob makes unusual noises.
Ensure the burners are correctly seated and not obstructed. If the noise persists, consult a qualified technician.
Pros and Cons
Pros
- Precise heat control with FlameSelect for consistent cooking results.
- Versatile cooking options with the dual control wok burner.
- Durable and stable design with cast iron pan supports.
- Easy to use with front-mounted controls and integrated ignition.
- Sustainable cooking with biomethane gas compatibility.
Cons
- Requires professional installation for gas connection.
- May require adapting existing kitchen cutouts.
- Cleaning may require more attention due to the burner design.
- Requires access to a gas line.
Setup, Compatibility & Care
Setup:
- Professional Installation: This gas hob *must* be installed by a qualified professional due to the gas connection requirements.
- Niche Size: Ensure your countertop cutout matches the hob's required niche size: H 45 x W 560 x D (480-492mm).
- Gas Connection: Connect the hob to your gas supply, ensuring all connections are secure and leak-free.
- Electrical Connection: Plug the hob into a 220-240 V, 50-60 Hz power outlet. The power cord length is 100 cm.
Compatibility:
- Gas Type: This hob is pre-set for natural gas, but LPG jets are included for bottled gas.
- Worktop Thickness: The minimum worktop thickness is 30 mm.
Care:
- Cleaning: Clean the hob regularly with a damp cloth and mild detergent. Avoid abrasive cleaners.
- Pan Supports: Remove and clean the cast iron pan supports separately. Wash with warm, soapy water.
- Burners: Keep the burners clean to ensure efficient and even heating. Use a small brush to clean any food debris from the burner ports.