3 Way Quick Wire Connector - TIGER POWER SUPPLIES - TGR-QC-3-3
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone using the TIGER POWER SUPPLIES TGR-QC-3-3 quick wire connector. It offers a fast, screwless way to split wires, saving time and effort during installation. However, ensure the wire gauge is within the specified range for optimal performance. This product is a 3-way quick wire connector splitter, rated for 32A and 250V AC, and designed for wires from 0.08mm² to 2.5mm² (28AWG to 12AWG).
All features
| Model Part Number | TGR-QC-3-3 |
|---|---|
| Brand | TIGER POWER SUPPLIES |
Extended Product Information
FAQs
What wire gauge is compatible?
The connector is compatible with wires ranging from 0.08mm² to 2.5mm² (28AWG to 12AWG).
What is the voltage rating?
The voltage rating is 250V AC.
What is the current rating?
The current rating is 32A.
How do I install the wires?
Strip 9mm of insulation from the wire, open the lever, insert the wire, and close the lever.
Can I use this connector outdoors?
It is not recommended for use in wet or damp environments.
How many wires can I connect?
The connector allows for three wire connections.
What is the required strip length?
The required strip length is 9mm.
Troubleshooting
Connection is loose or intermittent.
Ensure the wire is fully inserted and the lever is securely closed. Re-strip the wire if necessary and try again.
Connector does not accept the wire.
Verify the wire gauge is within the 0.08mm² to 2.5mm² (28AWG to 12AWG) range.
Device is not working after connection.
Check the power supply and connections. Make sure all wires are properly inserted and the levers are closed.
Pros and Cons
Pros
- Faster installation compared to screw-type connectors.
- Screwless design eliminates the need for tools.
- Suitable for a wide range of wire sizes.
- Compact size allows for use in confined spaces.
- High current and voltage ratings ensure reliability.
Cons
- Requires a specific wire stripping length (9mm).
- Limited to 3-way connections.
- May not be suitable for extremely fine or large gauge wires outside the specified range.
- Requires proper insertion and lever closure to ensure a secure connection.
Setup, Compatibility & Care
- Preparation:
- Ensure the power is turned OFF before starting any wiring work.
- Use appropriate wire strippers to remove 9mm of insulation from the wire ends.
- Connection:
- Open the levers on the connector.
- Insert the stripped wire into the appropriate port.
- Close the lever to secure the wire.
- Compatibility:
- Compatible with wires ranging from 0.08mm² to 2.5mm² (28AWG to 12AWG).
- Ensure the total amperage of the connected devices does not exceed 32A.
- The connector is designed for use with 250V AC circuits.
- Care:
- Avoid using the connectors in wet or damp environments.
- Regularly inspect the connections to ensure they are secure and the levers are properly closed.
- Do not exceed the specified voltage or current ratings.