Kitchen Cabinet Base Unit - 3 Drawer - J-Pull - 600mm - White

Putting your kitchen cabinet together has never been so simple. With this Kitchen Kit flatpack bas...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

This guide is for DIY enthusiasts and professional installers looking to assemble kitchen cabinets quickly and efficiently. The Kitchen Kit flatpack base unit's key benefit is its rapid 'glue and click' assembly, allowing cabinets to be built in as little as 30 seconds, offering a strong and reliable fixing. A caveat to consider is that doors, plinths, panels, and other accessories are sold separately.

All features

ColourWhite
Model Part NumberFKKJ0506
BrandKitchen Kit

Extended Product Information

FAQs

How long does it take to assemble a cabinet?

With the 'glue and click' system, cabinets can be assembled in as little as 30 seconds, making it exceptionally fast.

What is the weight capacity of the drawers?

Each of the three drawers has been tested to a load capacity of 25kg.

Are doors included with the base unit?

No, doors, plinths, panels, and other accessories are sold separately. You can choose from the J-Pull collection in various colours.

What does '49mm service void' mean?

This refers to a 49mm gap at the rear of the cabinet, providing space to discreetly house pipes, wiring, or other services.

Is this unit moisture resistant?

Yes, the cabinets are laminated and edged with PUR adhesive, offering superior resistance to heat and moisture.

What is the FIRA Gold certification?

FIRA Gold certification is an independent endorsement of product quality and durability, signifying that the cabinets and doors meet high industry standards.

Can I change the door hinges to the other side?

Yes, the J-Pull doors can be hinged on either the left or right side of the kitchen units, offering design flexibility.

What color is the inside of the drawer?

The drawer fronts have a white finish, while the inner part of the drawer is grey.

Troubleshooting

Cabinet panels do not click together securely.

Ensure adhesive is applied correctly and evenly to all connection points. Check for any debris or obstructions preventing a flush fit before applying pressure.

Drawers are not closing smoothly or are sticking.

Verify that the drawer runners are correctly installed and aligned within the cabinet. Check for any obstructions inside the drawer or runners. Ensure the cabinet is level.

Drawer bottoms feel weak under load.

Confirm the drawer back panel is correctly seated and secured. Ensure the load does not exceed the 25kg tested capacity.

Unit is wobbly or unstable.

Adjust the height of the four adjustable legs until the unit is stable and level on the floor. Ensure all connections are tightened.

Door alignment is off.

If doors are sold separately and installed by the user, check the hinge adjustment screws. Consult the hinge manufacturer's guide for fine-tuning alignment.

Pros and Cons

Pros

  • Extremely fast assembly time, significantly reducing installation labor.
  • Robust construction with a 25kg drawer load capacity.
  • Modern, handleless J-Pull door design for a clean look.
  • Integrated soft-close mechanism for quiet drawer operation.
  • Adjustable legs and service void enhance practicality and installation flexibility.
  • High-quality materials and FIRA Gold certification ensure durability.

Cons

  • Doors, plinths, panels, and other accessories must be purchased separately.
  • The white finish is only on the drawer fronts; the inner drawer is grey.
  • Requires specific glue for the 'glue and click' assembly (not always included).
  • May require additional tools for final adjustments and secure fitting.
  • Delivery times can vary, especially for non-mainland UK addresses.

Setup, Compatibility & Care

Setup:

  1. Ensure you have a suitable adhesive for the 'glue and click' system.
  2. Lay out all components and identify the cabinet panels and drawer parts.
  3. Apply adhesive to the designated connection points on the panels.
  4. Press the panels together firmly, ensuring they click into place.
  5. Assemble the drawers and insert them into the cabinet carcass.
  6. Attach the 19mm J-Pull doors (ensure correct left/right hinging if applicable).
  7. Install the four adjustable legs and level the unit once in its final position.
  8. Utilize the 49mm service void for any necessary pipework or wiring.

Compatibility:

  • This base unit is designed to work with Kitchen Kit's range of J-Pull doors, plinths, panels, and accessories. These are sold separately.
  • The doors can be hinged on either the left or right side, offering flexibility in design.
  • Frontal sizes for the drawers are: one 140mm x 596mm and two 283mm x 596mm.

Care:

  • The laminated surfaces and PUR edging are resistant to heat and moisture. Clean with a damp cloth and mild detergent.
  • Avoid abrasive cleaners or solvents, which can damage the finish.
  • Periodically check the adjustable legs for stability and re-level if necessary.