D.I.D VX X-Ring Gold Motorcycle Drive Chain - DID525VXGB112
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The D.I.D VX X-Ring Gold Motorcycle Drive Chain is designed for street and touring riders who require a high-performance, low-maintenance solution for power transmission. Its key benefit lies in the advanced X-ring sealing technology that significantly reduces friction and prevents debris ingress, though users should be prepared for the specialized skill required to install the included ZJ rivet link correctly.
All features
| Model Part Number | DID525VXGB112 |
|---|---|
| Brand | D.I.D |
Extended Product Information
FAQs
Can I use a clip-style master link with this chain?
No, this chain is designed for use with the provided ZJ rivet link to ensure the required fatigue resistance and safety standards.
How often should I lubricate the chain?
While the X-rings hold internal lubrication well, you should apply an X-ring safe chain wax every 300 to 500 miles or after riding in wet conditions.
Does the gold finish offer any functional benefit?
The gold finish is primarily for aesthetics and provides an extra layer of corrosion resistance against the elements.
What tools are needed for installation?
You will need a chain breaker to remove your old chain and a rivet tool to securely stake the pins of the new ZJ link.
Can I install this on a larger displacement bike?
Always refer to your motorcycle owner's manual for the required chain pitch and tensile strength rating for your specific engine size.
Troubleshooting
Chain making audible noise or clicking
Check chain tension; it may be too loose or misaligned on the rear sprocket.
Visible stiff or 'kinked' links
Clean the area thoroughly with an approved X-ring cleaner and apply a high-quality chain lubricant; replace the chain if the link remains seized.
Chain stretching rapidly after installation
Verify that your rear sprockets are not worn, as worn teeth will accelerate chain wear regardless of quality.
Pros and Cons
Pros
- Significantly reduced maintenance requirements due to X-ring seals
- Extended service life compared to standard O-ring chains
- High-tensile strength minimizes frequent chain tension adjustments
- Superior protection against internal wear from dirt and grit
Cons
- Requires a specialized rivet tool for professional-grade installation
- Initial cost is higher than standard non-sealed chains
- Cannot be installed with a clip-style master link for safety reasons
Setup, Compatibility & Care
To ensure peak performance, verify that your motorcycle requires a 525 pitch chain as indicated by the 'DID525VXGB112' specification. Always replace your sprockets when installing a new chain to prevent premature wear. For installation, a high-quality rivet tool is mandatory to properly flare the ZJ rivet link pins. When performing maintenance, use only O-ring/X-ring compatible chain cleaners and waxes, as harsh solvents can damage the rubber seal gaskets and lead to premature failure.