Proclad Aqua PVC Wall Cladding Panels - Aqua
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for homeowners and contractors looking for a durable, waterproof, and hygienic wall covering solution for bathrooms, wetrooms, and showers. The Proclad Aqua panels offer a maintenance-free alternative to tiles and grout, providing a 100% waterproof barrier that is easy to install and clean. A key benefit is the seamless, grout-free finish that prevents mold and mildew growth. However, users should ensure walls are flat and dry before installation for optimal adhesion.
All features
| Model Part Number | Aqua |
|---|---|
| Brand | Proclad |
Extended Product Information
FAQs
Are Proclad Aqua panels truly waterproof?
Yes, the panels are 100% waterproof and leakproof, making them ideal for showers, bathrooms, and wetrooms where constant moisture is present.
Can I install these panels over existing tiles?
Yes, provided the existing tiles are sound, securely adhered, and form a perfectly flat surface. Clean the tiles thoroughly before applying the cladding panels with adhesive.
What kind of adhesive should I use?
You should use a high-grab adhesive specifically recommended for PVC wall cladding and suitable for wet environments. Always follow the adhesive manufacturer's instructions.
How do I cut the panels accurately?
Panels can be cut using a fine-toothed saw or a sharp utility knife. Ensure you score the panel deeply for cleaner cuts, and always wear safety glasses.
What is the cleaning and maintenance routine?
Maintenance is simple. Clean the panels with a soft cloth, warm water, and mild soap. Avoid abrasive cleaners.
Do I need to seal the edges or joints?
While the panels themselves are waterproof, it is recommended to use edge trims and seal corners and joints with a suitable waterproof sealant for maximum protection against water ingress.
What is the warranty period for these panels?
The Proclad Aqua PVC Wall Cladding Panels come with a 10-year guarantee.
Troubleshooting
Panel adhesion is poor
Ensure the wall surface was clean, dry, and completely flat before application. Re-apply with a fresh application of appropriate adhesive, ensuring even coverage and sufficient pressure.
Cutting the panels results in rough edges
Use a fine-toothed saw or a sharp utility knife with a fresh blade. Score the panel deeply and make multiple passes for a cleaner cut. Sand lightly with fine-grit sandpaper if necessary.
Water is still penetrating the wall
Check all joint lines, edges, and corners for gaps. Ensure all sealing and trim applications are complete and watertight. Re-apply sealant or adhesive where needed.
Panels appear warped or uneven
Verify that the panels were installed on a truly flat and stable substrate. Extreme temperature fluctuations can sometimes affect PVC; ensure adequate ventilation if heat sources are nearby.
Pros and Cons
Pros
- Completely waterproof and ideal for wet environments.
- Hygienic and easy to clean, reducing the risk of mold and mildew.
- Simple and fast installation process, saving time and labor costs.
- Durable and impact-resistant construction ensures longevity.
- Low maintenance, requiring only basic cleaning.
- Provides a modern, seamless aesthetic without grout lines.
Cons
- Requires flat, dry walls for proper adhesion.
- May require specific adhesive and cutting tools.
- PVC material might not suit all aesthetic preferences compared to natural materials.
- Initial cost might be higher than some basic tiling options.
Setup, Compatibility & Care
Setup:
- Ensure the existing wall surface is flat, dry, and free from dust or grease.
- Measure and cut panels to size using a fine-toothed saw or sharp utility knife. Always wear safety glasses.
- Apply a suitable high-grab adhesive recommended for PVC cladding to the back of the panel or the wall, following the adhesive manufacturer's instructions.
- Firmly press the panel into place, ensuring a secure bond. Use temporary supports if necessary.
- Fit edge trims and corner pieces as required, using the appropriate adhesive.
Compatibility:
- Suitable for installation on plasterboard, existing tiles (ensure they are sound and flat), or other flat, rigid surfaces.
- Designed for use in bathrooms, showers, wetrooms, kitchens, utility rooms, and other areas subject to moisture.
- Not intended for use as floor coverings or on uneven/flexible surfaces.
Care:
- Clean regularly using a soft cloth dampened with warm water and mild, non-abrasive soap.
- Wipe dry with a clean cloth.
- Avoid using abrasive cleaners, solvents, or scouring pads, as these can damage the surface.