Tsukineko Versacraft Ink Pad - Emerald
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Tsukineko Versacraft Ink Pad in Emerald is designed for crafters and artists looking to add permanent, vibrant color to a wide range of surfaces, especially fabric. Its key benefit is its versatility and permanence when heat-set. A caveat to be aware of is that on fabric, the ink can wash out before heat setting, and heat setting is crucial for permanence.
All features
| Model Part Number | VKS121 |
|---|---|
| Brand | Tsukineko |
Extended Product Information
FAQs
What surfaces can I use the Tsukineko Versacraft Emerald ink on?
You can use it on fabric, unpainted wood, uncoated paper, Japanese papers, tanned leather, and unglazed pottery.
How do I make the ink permanent on fabric?
You must heat set the ink using an iron on a high setting (like 'cotton') for at least 15-30 seconds. It is recommended to place a protective cloth between your iron and the project.
Can I wash items stamped with Versacraft ink?
Yes, once the ink has been properly heat-set, items stamped with Versacraft ink can be washed. Results may vary slightly depending on fabric type and wash cycle.
How long does the ink take to dry?
Drying time varies based on the surface material, humidity, and air circulation. On paper, it may dry in minutes, but on fabric, it needs to dry sufficiently before heat setting. Always allow adequate drying time before proceeding to the next step.
Can I re-ink the Versacraft ink pad?
Yes, the Versacraft ink pad can be re-inked using Tsukineko Versafine or Versacraft refill ink in the corresponding Emerald color. Apply the refill ink and let it absorb.
Is this ink archival quality?
Yes, the Versacraft ink is noted for its opacity and permanence, making it suitable for archival scrapbooking projects.
What is the size of the ink pad?
The raised pad size is 24mm x 24mm.
Troubleshooting
Ink not permanent on fabric after heat setting.
Ensure you are using the correct heat setting (e.g., 'cotton' or high) for at least 15-30 seconds. Verify that a protective cloth was used between the iron and the fabric. Some fabric types may also absorb and hold ink differently; test on a scrap piece first.
Stamp impression is weak or patchy.
Ensure the ink pad is adequately inked. If the pad feels dry, re-ink it with the appropriate refill ink. Press the stamp firmly and evenly onto the ink pad, then onto your surface.
Ink smears or washes away before heat setting.
This is expected behavior on fabrics prior to heat setting. Allow the stamped item to dry completely before attempting to heat set. Handle stamped items gently until heat set.
Ink pad appears dry.
The ink pad may need re-inking. Use Tsukineko Versafine or Versacraft refill ink in the corresponding Emerald color. Apply the refill ink sparingly and allow it to soak in for a few hours before use.
Ink bleeds on porous surfaces like paper.
Ensure the paper is not too absorbent. For very porous papers, a light coat of sealer or using a different ink type might be necessary. The Versacraft is designed for a range of porosity, but extreme cases may require adjustments.
Pros and Cons
Pros
- Excellent adhesion and permanence on various materials when heat-set.
- Suitable for a wide array of craft projects, from paper to textiles.
- Provides a rich, opaque color for professional-looking results.
- Archival quality is ideal for preserving memories in scrapbooks.
- Easy to use with standard stamping techniques.
Cons
- Requires heat setting for permanence, adding an extra step.
- Ink may wash out of fabric if not heat-set promptly.
- Not recommended for unprimed or painted wood surfaces.
- Drying time can vary significantly based on material and environmental conditions.
- May leave a faint stain on fabric even before heat setting.
Setup, Compatibility & Care
Setup: The Versacraft ink pad is ready to use straight out of the packaging. Ensure the lid is securely closed when not in use to prevent the ink from drying out.
Compatibility: This ink is compatible with most standard rubber or clear stamps. It adheres well to porous surfaces such as fabric, unpainted wood, uncoated paper, Japanese papers, tanned leather, and unglazed pottery. It is not recommended for glossy or coated papers, or plastic surfaces.
Care:
- Storage: Store the ink pad flat in a cool, dry place, away from direct sunlight.
- Cleaning Stamps: Clean your stamps immediately after use with a stamp cleaner or mild soap and water to remove excess ink.
- Re-inking: If the pad becomes dry, it can be re-inked with Tsukineko Versafine or Versacraft refill ink. Use the appropriate color refill for best results.
- Pad Maintenance: Keep the lid tightly closed when not in use. Avoid touching the raised ink pad surface directly.