Sealey Pneumatic Fluid Extractor/Brake Bleeder 2.5L - VS835
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Sealey VS835 Pneumatic Fluid Extractor/Brake Bleeder is for DIY mechanics and professional technicians needing an efficient, one-person solution for brake fluid changes and extractions. Its key benefit is simplifying a often messy job with a standard workshop air supply. A potential caveat is the need for a compatible air compressor. This tool facilitates easy bleeding or complete replacement of brake fluid using its 2.5L capacity bottle and included extraction pipe, without requiring specialized reservoir caps. It's designed for broad compatibility with most brake bleed nipples and ABS systems.
All features
| Model Part Number | VS835 |
|---|---|
| Brand | Sealey |
Extended Product Information
FAQs
Can this tool be used for power steering fluid extraction?
While primarily designed for brake fluid, its extraction capability might be suitable for power steering fluid depending on viscosity and system type. Always consult your vehicle's service manual.
How do I clean the 2.5L bottle?
After emptying, rinse the bottle thoroughly with a brake cleaner or a mild solvent, followed by a rinse with clean water. Ensure it is completely dry before storage.
What type of air compressor is required?
A standard workshop air compressor capable of providing consistent pressure suitable for pneumatic tools is required. Specific PSI requirements will depend on your compressor and the task, but typical workshop pressures are usually sufficient.
Does the tool come with different size adapters for bleed nipples?
The tool is designed to fit most standard bleed nipples. However, specific adapters are not typically included. Ensure a snug fit before operation.
How effective is this tool on ABS systems?
The VS835 is designed to work with most ABS systems. However, due to the complexity of some ABS hydraulic modules, it's always recommended to follow the manufacturer's specific bleeding procedures if available.
What is the warranty period for this product?
Please refer to the Sealey warranty documentation or contact your retailer for specific warranty information, as it can vary.
Troubleshooting
No suction or extraction is weak
Ensure the air compressor is connected and providing adequate pressure. Check for air leaks in the hoses or connections. Verify the extraction pipe is correctly positioned and not blocked.
Fluid is not being drawn from the bleed nipple
Confirm the bleed nipple is open. Ensure a good seal between the bleed nipple and the tool's hose. Check that the pneumatic system is functioning correctly by testing suction directly from the master cylinder.
Tool is leaking air
Inspect all hose connections and fittings for tightness. Check the integrity of rubber seals and O-rings on the bottle and hose attachments. Replace any damaged seals.
Pros and Cons
Pros
- Enables solo brake fluid changes and bleeding.
- Uses readily available workshop air supply.
- Large 2.5L capacity reduces the need for frequent emptying.
- Minimizes mess with its extraction and bleeding system.
- Versatile for use on various vehicles including cars, vans, and motorcycles.
Cons
- Requires a functional workshop air compressor.
- May not be suitable for very large brake systems without intermediate emptying.
- Operation relies on maintaining consistent air pressure.
- The effectiveness on all ABS systems may vary.
Setup, Compatibility & Care
Setup: Connect the tool to a standard workshop air compressor using the appropriate fittings. Ensure the air supply is clean and dry. Attach the extraction hose to the master cylinder reservoir and the bleed nipple hose to the caliper or wheel cylinder bleed screw.
Compatibility: This tool is designed to work with the majority of standard brake bleed nipples found on cars, vans, and motorcycles, including those integrated with ABS systems. No specialized brake reservoir caps are required.
Care: After each use, drain any residual fluid from the bottle and clean it with an appropriate brake cleaner. Inspect hoses and seals for wear or damage. Store the tool in a clean, dry environment. It is recommended to periodically check and clean the air intake filter if applicable to your air supply.