Liberon Liming Wax - 250ml
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
Liberon Liming Wax is designed for woodworkers and DIY enthusiasts seeking to achieve a distinctive limed or whitewashed effect on oak, other hardwoods, and softwoods like pine. Its key benefit is the easy application and quick-drying formula, allowing for rapid project completion. A potential caveat is that it is intended for interior use only and requires proper preparation for optimal results. This white wax offers a coverage of 3-4m² per 250ml and is EN71 Part 3 Approved, making it safe for use on items like children's toys.
All features
| Model Part Number | 003512 |
|---|---|
| Brand | Liberon |
Extended Product Information
FAQs
Can Liberon Liming Wax be used outdoors?
No, Liberon Liming Wax is specifically formulated for interior use only.
What is the best way to apply the wax?
It is typically applied with fine steel wool (grade 000 or 0000) or a lint-free cloth, working it into the wood grain.
How long does it take to dry?
The wax dries very quickly, usually within 5 minutes, allowing for rapid recoating or buffing.
Can I apply a varnish or oil over the liming wax?
Yes, after the wax has fully cured (allow 24 hours), you can apply a suitable clear topcoat like Liberon Finishing Oil or varnish for added protection and sheen.
Is this product safe for children's toys?
Yes, Liberon Liming Wax is EN71 Part 3 Approved, making it safe for use on toys.
What surfaces can I use this on?
It is suitable for oak, other hardwoods, and softwoods like pine. Ensure the surface is properly prepared.
How do I clean a surface treated with Liming Wax?
Dust with a soft cloth. For cleaning, use a slightly damp cloth and wipe dry immediately. Avoid abrasive cleaners.
Troubleshooting
Uneven or patchy finish
Ensure the wood surface was properly prepared and dust-free. Apply the wax more evenly, working it into the grain. Buff off excess thoroughly.
Wax not drying or staying tacky
The application may be too heavy. Apply thinner coats and ensure adequate ventilation. Allow more drying time before buffing.
White residue left on the surface
Excess wax was not removed properly. Buff more vigorously with a clean cloth to remove all dry, powdery residue.
Color is too opaque, hiding wood grain
Apply a thinner coat of wax or buff off more aggressively to reveal more of the underlying wood grain.
Pros and Cons
Pros
- Achieves a popular limed wood aesthetic.
- Simple and quick application process.
- Fast drying time speeds up project completion.
- Safe for use on children's toys.
- Suitable for a range of wood types.
- Good value due to effective coverage.
Cons
- Strictly for interior applications.
- Requires careful surface preparation for best results.
- May not be suitable for heavily oiled or waxed surfaces without prior stripping.
- Achieving a uniform finish can require practice.
- The white color may obscure fine wood grain details if over-applied.
Setup, Compatibility & Care
Preparation: Ensure the wood surface is clean, dry, and free from dust, grease, and old finishes. For best adhesion and appearance, sand the wood smooth and remove all sanding dust. If the wood has been previously finished, it may need to be stripped back to bare wood.
Application: Apply Liberon Liming Wax sparingly using fine steel wool (grade 000 or 0000) or a clean, lint-free cloth. Work the wax into the wood grain and pores. Allow to dry for approximately 5 minutes.
Finishing: Once dry, buff the surface with a clean, lint-free cloth to remove any excess wax and achieve a smooth sheen. For added durability or a different sheen level, a clear topcoat such as Liberon Finishing Oil or a suitable varnish can be applied after the wax has fully cured (typically 24 hours).
Compatibility: Suitable for use on bare or previously finished (ensure compatibility) hardwoods and softwoods. Not recommended for exterior use. Test on an inconspicuous area first.
Care: To maintain the finish, dust regularly with a soft, dry cloth. For cleaning, use a lightly damp cloth and wipe dry immediately. Avoid harsh detergents or abrasive cleaners.