U-Pol Static Plastic Mixer Tip - PLAS/TIP
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The U-Pol Static Plastic Mixer Tip is an essential tool for professional technicians and DIY automotive enthusiasts who need to perform structural repairs using 50ml adhesive cartridges. By ensuring a precise 1:1 mixing ratio of two-component (2K) products, these tips help you achieve consistent, OEM-quality finishes on plastic components. While these tips are highly effective for professional-grade bonding, users should be aware that they are single-use components and must be disposed of after the adhesive cures within the tube.
All features
| Model Part Number | PLAS/TIP |
|---|---|
| Brand | U-Pol |
Extended Product Information
FAQs
Can I reuse these mixer tips?
No, these are single-use items. Once the 2K adhesive is mixed, it will cure inside the tip and harden, making it impossible to clean.
Will this tip fit my 200ml cartridge?
No, the PLAS/TIP is specifically engineered for 50ml cartridges.
Do I need a special tool to use this?
You need a standard 50ml dual-cartridge applicator gun to dispense the product through the mixer tip.
What happens if the adhesive hardens in the tip?
If the adhesive hardens, you must discard the tip and attach a fresh one. Do not attempt to clear or reuse a clogged tip.
Does this tip work with all 2K adhesives?
It is designed for use with U-Pol 50ml 2K adhesive systems requiring a 1:1 ratio.
Troubleshooting
Adhesive is not coming out of the tip
Check if the adhesive has already cured inside the tip and replace it with a new one.
The mixture looks streaky or uneven
Ensure the tip is properly locked onto the cartridge and purge a small amount of product onto a waste piece of cardboard before applying.
Tip pops off during application
Verify that the locking tabs on the 50ml cartridge are not damaged and the mixer tip is fully twisted into the locked position.
Pros and Cons
Pros
- Ensures accurate 1:1 chemical mixing ratio
- Compatible with all standard 50ml dual-cartridge systems
- Helps achieve professional, factory-style structural repairs
- Easy to attach and secure to existing cartridges
Cons
- Designed for single-use only
- Adhesive will harden inside the tip if left too long
- Requires a compatible 50ml adhesive applicator gun
- Non-reusable once the curing process begins
Setup, Compatibility & Care
To set up the mixer tip, remove the cap from your 50ml adhesive cartridge, align the nozzle with the cartridge outlet, and twist it securely into place. These tips are fully compatible with any standard 50ml manual or pneumatic adhesive gun. Regarding care: there is no cleaning process for these tips, as they are disposable. When finished with your repair, either leave the old tip on the cartridge to act as a seal for the remaining adhesive or replace it with a fresh cap if you intend to store the cartridge for future use. Always monitor the working time (pot life) of your adhesive to prevent it from hardening inside the nozzle while you are mid-application.