Showerwall Navy Herringbone Wall Paneling - 2400x1200mm
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Showerwall Navy Herringbone Wall Paneling is ideal for homeowners and renovators looking to create a stylish and waterproof accent wall in bathrooms and wet areas. Its key benefit is the stunning, high-gloss, glass-like finish that mimics digital imagery for a bespoke look. A significant caveat to consider is the 3-4 week made-to-order lead time.
All features
| Model Part Number | SWACPKSCA1612 |
|---|---|
| Brand | Showerwall |
Extended Product Information
FAQs
What is the lead time for Showerwall Acrylic panels?
As these panels are made to order, the typical lead time is 3-4 weeks from order confirmation.
Can I install these panels myself?
Yes, the panels are designed for fast and easy DIY installation, especially with the included installation kit. However, if you are unsure, professional installation is recommended.
What surfaces can these panels be installed over?
They can be fitted directly over existing tiles, provided the surface is sound, flat, and clean. They can also be installed on plasterboard or other suitable substrates.
How do I clean and maintain the panel's finish?
Clean with a soft, damp cloth and a mild, non-abrasive detergent. Avoid harsh chemicals and abrasive scouring pads to protect the glass-like finish.
Are the panels truly waterproof?
Yes, the panels themselves are 100% waterproof, and when installed correctly with the provided sealant, they create a completely waterproof system for your bathroom.
What is included in the installation kit?
The kit contains the correct amount of sealant for bonding and edge sealing, alcohol wipes for surface preparation, and sticky pads for temporary adhesion during curing.
What is the warranty period for these panels?
Showerwall Acrylic panels come with a 30-year guarantee.
Troubleshooting
Panel does not adhere properly
Ensure the surface was thoroughly cleaned and dried before application. Check that sufficient sealant was used and that the panel was held in place until the sealant began to cure. Ensure sticky pads were used for temporary hold.
Visible gaps or leaks at joints
Re-seal all edges and joints immediately using the recommended sealant. Ensure an adequate bead of sealant was applied to create a continuous waterproof barrier.
Surface appears dull or scratched
Avoid using abrasive cleaning agents or tools. Use a soft cloth and mild soap for cleaning. Light scratches may be buffed out with specialized acrylic polish, following product instructions.
Pattern does not align correctly
Carefully re-measure and cut panels if necessary. Ensure panels are laid in the correct orientation for pattern matching. This is best addressed before permanent adhesive is applied.
Pros and Cons
Pros
- Provides a striking, modern aesthetic with its Navy Herringbone pattern and glass-like finish.
- Offers complete waterproofing, ideal for high-moisture environments.
- Simple to clean and maintain, promoting a hygienic bathroom space.
- Can be installed directly over existing tiles, simplifying renovation.
- Comes with a comprehensive installation kit for ease of use.
- Backed by a 30-year guarantee for peace of mind.
Cons
- Requires a 3-4 week lead time as panels are made to order.
- Acrylic material may be susceptible to scratching if abrasive cleaners or tools are used.
- Requires careful handling during installation to avoid damage.
- Limited to specific sizes as listed, though different sizes are available as variants.
- Requires specific sealant application for optimal waterproof performance.
Setup, Compatibility & Care Instructions
Setup:
- Ensure the surface is clean, dry, and free from dust. Use the provided alcohol wipes for best results.
- Dry fit the panels to ensure correct placement and pattern alignment.
- Apply the supplied sealant generously to the back of the panel or the wall surface as per manufacturer guidelines.
- Use the sticky pads for immediate adhesion and support while the sealant cures.
- Seal all edges and joints thoroughly with the provided sealant to ensure a watertight finish.
Compatibility:
- The panels can be fitted directly over existing tiles, provided the surface is sound and even.
- Ensure the wall substrate is suitable for bonding.
- Trims are not required for this specific product, simplifying the installation process.
Care:
- Clean the panels with a soft, damp cloth and mild detergent.
- Avoid abrasive cleaners, scouring pads, or harsh chemicals that could damage the acrylic surface.
- Wipe away any soap or water residue regularly to maintain the pristine finish.