Stick Fast 500mL Adhesive Aerosol Spray - Aerosol Solutions
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Stick Fast 500mL Adhesive Aerosol Spray from Aerosol Solutions is designed for users needing a fast-acting, strong, and versatile bonding solution for a wide range of materials. Its primary benefit is its rapid and robust adhesion across diverse substrates, making applications efficient and economical. A key limitation to note is its unsuitability for flexible PVC or expanded polystyrene. This adhesive offers a uniform spray pattern for easy application, quick drying for minimal downtime, and a long open time for adjustments.
All features
| Model Part Number | ASOMA0600 |
|---|---|
| Brand | Aerosol Solutions |
Extended Product Information
FAQs
What surfaces can Stick Fast bond to?
Stick Fast bonds to a wide variety of substrates including carpets, wood, concrete, stone, tiles, rubber, foam, metals, rigid plastics, polyethylene, canvas fabrics, cardboard, paper, and cork.
What surfaces should I avoid using Stick Fast on?
You should avoid using Stick Fast on flexible PVC and expanded polystyrene.
How long is the open time for Stick Fast?
Stick Fast has a long open time, allowing for adjustments before the bond fully sets. Specific times may vary based on environmental conditions.
Can Stick Fast be used for temporary bonding?
Yes, Stick Fast is useful for temporary bonding applications as an alternative to double-sided tapes.
How do I clean up excess adhesive or overspray?
Fresh, uncured adhesive can typically be cleaned with a suitable solvent. Once cured, it may require mechanical removal or specialized removers.
What is the shelf life of Stick Fast?
The shelf life typically depends on storage conditions. It's best to store in a cool, dry place and check the product packaging for specific expiration dates or recommendations.
Is Stick Fast suitable for outdoor use?
While Stick Fast provides a strong bond, its suitability for long-term outdoor exposure depends on the specific application and environmental factors. Check product data sheets for specific resistance information.
Troubleshooting
Uneven spray pattern
Shake the can thoroughly before and during use. Ensure the nozzle is not clogged. If clogged, try cleaning it by inverting the can and spraying briefly.
Adhesive not bonding strongly
Ensure surfaces are clean and dry. Allow the adhesive to become tacky before joining. Ensure sufficient adhesive was applied and surfaces were pressed together firmly.
Nozzle is blocked
Invert the can and spray for a few seconds to clear the nozzle. If still blocked, try carefully cleaning the nozzle opening with a solvent and a pin (ensure can is depressurized before attempting).
Slow drying time
Ensure adequate ventilation and appropriate temperature and humidity levels, as these can affect drying speed.
Pros and Cons
Pros
- Bonds a very wide variety of materials.
- Provides a fast and strong adhesive bond.
- Easy and economical to apply with a uniform spray.
- Fast drying time speeds up project completion.
- Long open time allows for precise placement.
- Suitable for numerous applications from construction to automotive.
Cons
- Not suitable for use on flexible PVC.
- Not suitable for use on expanded polystyrene (EPS/Styrofoam).
- Aerosol cans require proper ventilation during use.
- Requires appropriate personal protective equipment (PPE) during application.
Setup, Compatibility & Care
Setup:
- Ensure surfaces to be bonded are clean, dry, and free from dust, oil, or grease.
- Shake the aerosol can well before use.
- Hold the can approximately 6-8 inches (15-20 cm) from the surface and apply a thin, even coat.
- Apply to one or both surfaces as required by the specific application, following product instructions.
- Allow the adhesive to become tacky before joining the surfaces (refer to open time specifications).
- Press surfaces together firmly to ensure good contact.
Compatibility:
- Compatible Materials: Carpets, wood, concrete, stone, tiles, rubber, foam, metals, rigid plastics, polyethylene, canvas fabrics, cardboard, paper, and cork.
- Incompatible Materials: Flexible PVC, expanded polystyrene.
Care:
- Store in a cool, dry place away from direct sunlight and heat sources.
- Keep the nozzle clean after use by inverting the can and spraying for a few seconds.
- Dispose of empty cans responsibly according to local regulations.