3M Panel Bonding Adhesive - 200ml - 08115
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for users of the 3M Panel Bonding Adhesive - 08115, a high-performance adhesive designed for bonding various automotive and industrial components. It excels at creating strong, durable bonds on steel, aluminum, and fiberglass, offering a reliable alternative to welding and riveting. However, it's essential to follow the application instructions carefully for optimal results, as improper use may impact bond strength.
All features
| Model Part Number | 08115 |
|---|---|
| Brand | 3M |
Extended Product Information
FAQs
What materials can this adhesive bond?
This adhesive can bond steel, aluminum, SMC, and FRP (traditional fiberglass).
What is the recommended temperature for application?
Apply the adhesive within the recommended temperature range specified in the product data sheet, usually between 60°F and 90°F (16°C and 32°C).
How long does the adhesive take to cure?
Curing time varies depending on temperature. Refer to the product data sheet for specific cure times based on temperature, but it can often be accelerated with heat.
Can I paint over the adhesive?
Yes, once the adhesive is fully cured, it can be painted. Make sure to clean the surface properly before painting.
How do I store the adhesive?
Store the adhesive in a cool, dry place away from direct sunlight.
What safety precautions should I take?
Wear appropriate personal protective equipment (PPE), including gloves, and eye protection during application. Ensure adequate ventilation.
How do I clean up the adhesive?
Uncured adhesive can be cleaned up with a solvent appropriate for epoxy removal, following the solvent manufacturer's instructions.
Troubleshooting
Bond failure after curing.
Ensure proper surface preparation. Clean the surfaces thoroughly before applying the adhesive. Check the expiration date of the adhesive and ensure the mixing ratio is correct.
Slow curing time.
Verify the ambient temperature; lower temperatures may extend curing time. Consider using heat acceleration if possible, following the manufacturer's guidelines.
Inconsistent bond line thickness.
Make sure you're applying an even amount. Double-check the mixing process to ensure proper component ratios.
Pros and Cons
Pros
- Creates strong, durable bonds.
- Offers corrosion resistance.
- Provides consistent bond line thickness.
- Speeds up the curing process with heat.
- Works with various materials (steel, aluminum, fiberglass).
- Can reinforce or replace welding/riveting.
Cons
- Requires careful surface preparation for optimal bonding.
- Two-part mixing is necessary which might be inconvenient for some.
- Curing time is still needed before the components are usable.
- Requires specific application tools.
- May not be suitable for all types of plastics.
Setup, Compatibility & Care
Setup:
- Surface Preparation: Thoroughly clean the surfaces to be bonded, removing any contaminants such as dirt, oil, and rust.
- Mixing: Use the provided applicator to dispense the two components and mix them thoroughly, according to the instructions.
- Application: Apply the mixed adhesive to the prepared surfaces.
- Assembly: Join the components and clamp them in place.
- Curing: Allow the adhesive to cure according to the recommended time and temperature.
Compatibility:
- Materials: Compatible with steel, aluminum, SMC, and FRP (traditional fiberglass).
- Not Recommended for: Certain plastics.
Care:
- Store in a cool, dry place.
- Keep away from direct sunlight.
- Use appropriate personal protective equipment (PPE) during application, including gloves and eye protection.