Plastic Gravel Grid Set - 3cm H, 50x50cm
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Novecrafto Plastic Gravel Grid Set is for homeowners and DIY enthusiasts looking for a durable, easy-to-install solution for stabilizing loose surfaces. Its key benefit is creating a strong, non-shifting base for driveways, paths, patios, and garden features with minimal effort and cost. A potential caveat is that while strong, the 3cm profile requires adequate depth of fill material to achieve maximum load-bearing capacity.
All features
| Model Part Number | IG30 |
|---|---|
| Brand | Novecrafto |
Extended Product Information
FAQs
What is the recommended fill material for the gravel grids?
Gravel or pebbles are ideal for driveways and paths. For lawn reinforcement, you can use soil and seed grass directly into the grids. Crushed stone also works well.
How much area does one set of 8 grids cover?
One set of 8 grids covers approximately 21.52 square feet (2 square meters).
Can I cut the grids to fit my specific area?
Yes, the plastic grids can be cut using a suitable saw to fit irregular shapes, corners, or edges of your project.
What is the load-bearing capacity of these grids?
When properly filled and installed, the grids can withstand up to 1000 tonnes per square metre, providing excellent stability.
Are these grids suitable for extreme weather conditions?
Yes, the weather-resistant design maintains stability in temperatures ranging from -30°C to +80°C without cracking or warping.
Do I need special tools to install the grids?
No, the grids feature a quick-fit interlocking system that requires no special tools for assembly. You may need a saw if cutting is required.
What is the thickness of each grid?
Each grid has a low profile of 1.18 inches (3 cm) in height.
Troubleshooting
Grids won't interlock easily
Ensure the interlocking tabs are clean and free of debris. Check that the grids are aligned correctly before applying pressure. A gentle tap with a rubber mallet might help.
Surface feels unstable after installation
Verify that the fill material is adequately spread and compacted within the grids. Check if the ground beneath the grids was properly prepared and leveled.
Grids appear to be shifting
Ensure all interlocking connections are fully engaged. Consider adding a border around the area to prevent lateral movement of the grids and fill material.
Water pooling on the surface
Confirm that the base layer has adequate drainage. The fill material should also allow for some percolation.
Pros and Cons
Pros
- Easy and fast tool-free installation
- Reduces material costs due to low profile
- Prevents sinking and erosion of ground surfaces
- Durable and weather-resistant construction
- Made from recycled plastic
- Versatile for numerous outdoor projects
Cons
- Requires a suitable fill material (gravel, soil, etc.) for full stability
- The 3cm depth may not be sufficient for extremely heavy, concentrated loads without proper base preparation
- May require trimming for complex shapes, adding a step to installation
- Effectiveness depends on proper filling and compaction
Setup, Compatibility & Care
Setup:
- Prepare the ground by leveling and compacting it.
- Lay the first grid, ensuring it is flat.
- Connect subsequent grids by aligning the interlocking edges and pressing them together until they snap securely into place. This can be done by hand or by gently tapping with a rubber mallet.
- Continue until the desired area is covered. Grids can be trimmed with a suitable saw if needed to fit edges or corners.
- Fill the grids with your chosen material (gravel, pebbles, soil, etc.), ensuring it is spread evenly and covers the entire surface of the grid.
- Compact the fill material for maximum stability.
Compatibility:
The grids are compatible with various fill materials including gravel, pebbles, crushed stone, soil (for grass seeding), and sand.
Care:
Clean the grids with a hose or broom as needed. The plastic is resistant to most common garden chemicals and extreme temperatures (-30°C to +80°C). Ensure fill material is maintained to prevent erosion or displacement.