Power Cable - White - 5M

Currently unavailable

Currently unavailable
This 5-meter white C7 to UK mains power cable is designed for users needing a reliable connection for low-powered appliances such as portable CD players, audio/video equipment, some laptop power supplies, and modern LG or Samsung LED/smart TVs. Its primary benefit is providing a safe and durable link between your device and the mains power. A potential caveat is its suitability only for devices with a C7 (figure 8) power input.
| Colour | White |
|---|---|
| Model Part Number | 005517 |
| Brand | kenable |
C7 is the IEC connector type, commonly referred to as a 'figure 8' connector due to the shape of its two round pins, resembling the number 8.
No, it is only suitable for TVs that specifically use a C7 (figure 8) power input socket. Many modern TVs use a standard IEC C13 connector (kettle lead) or a different power solution.
The 3 Amp fuse is a safety feature designed to blow and break the circuit in case of an electrical fault or surge, protecting both the cable and the connected appliance.
Yes, if your laptop's power adapter uses a C7 (figure 8) input port, this cable is suitable. Many older or smaller power bricks use this type of connection.
Check the power input port on your device. If it has two small, circular holes side-by-side, it likely requires a C7 (figure 8) cable. Refer to your device's manual for confirmation.
The 5-meter length offers greater flexibility than standard 1-2 meter cables, making it ideal for positioning devices away from power outlets without relying on extension leads.
RoHS certified means the product complies with the Restriction of Hazardous Substances directive, limiting the use of specific harmful materials in its manufacturing.
Ensure both ends of the cable are securely plugged in. Check if the UK mains plug is fully inserted into the wall socket. Verify that the wall socket is functioning by testing it with another appliance. Confirm the device itself requires a C7 power input.
Inspect the cable for any kinks, cuts, or damage. Ensure the C7 connector is firmly seated in the device's power port. Try wiggling the connector gently to check for a loose connection.
Unplug the cable immediately and check for any visible damage. Ensure the cable is not covered or restricted, allowing for adequate ventilation. If the issue persists or the cable is damaged, discontinue use and replace it.
Setup: Simply plug the C7 (figure 8) end into the corresponding power input port on your device and insert the UK mains plug into a suitable wall socket. Ensure the plug is fully seated.
Compatibility: This cable is compatible with any device featuring a C7 power inlet. Common examples include:
*Note: Always check your device's power input port to confirm it is a C7 (figure 8) type.*
Care: