WAGO Terminal Block/Splicing Connector - 2 Pole - Pack of 16
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for electricians and DIYers working with wiring applications up to 10AWG. The WAGO 221-612/995-010 offers a significant time-saving solution for secure conductor connections. A potential caveat is the specific conductor size range it supports, requiring users to verify compatibility for their projects. This 2-pole, 16-pack connector simplifies electrical connections for solid, stranded, and fine-stranded wires, allowing for quicker installations and handling higher power loads.
All features
| Model Part Number | 221-612/995-010 |
|---|---|
| Brand | WAGO |
Extended Product Information
FAQs
Can I use these connectors for aluminum wiring?
No, these WAGO connectors are designed exclusively for copper conductors.
What is the maximum number of wires I can connect in one WAGO 221-612 connector?
The 221-612 is a 2-pole connector, meaning it is designed to connect two individual conductors.
Do I need any special tools to use these connectors?
No, the primary advantage of these connectors is their tool-free operation. You only need a wire stripper to prepare the conductor.
What is the maximum ambient temperature for these connectors?
The maximum ambient temperature rating for these connectors is 85°C.
How do I determine the correct wire stripping length?
The required stripping length is typically indicated on the connector itself or within the product's technical documentation. A common length is 9-10mm.
Are these connectors reusable?
Yes, the lever mechanism allows for easy disconnection and reconnection of conductors, making them reusable.
Troubleshooting
Conductor not making a secure connection
Ensure the conductor is stripped to the correct length and is inserted fully into the connector port before closing the lever. Check that the conductor is within the specified AWG range (20-10AWG).
Lever is difficult to close
Verify that the conductor is fully inserted and that no stray wire strands are obstructing the lever mechanism. Ensure the conductor is not too thick for the connector's capacity.
Intermittent connection or power failure
Re-inspect the connection to ensure the conductor is properly seated and the lever is fully closed. Check for any signs of damage to the connector or conductor.
Pros and Cons
Pros
- Extremely fast and easy conductor connection without tools.
- Handles a broad range of wire types (solid, stranded, fine-stranded).
- Reduces installation time significantly.
- Suitable for higher current applications (up to 41A).
- Compact size saves space in junction boxes.
Cons
- Each connector is limited to two conductors.
- Requires conductors within the specified size range (20-10AWG).
- Requires stripping the wire conductor to the appropriate length before insertion.
Setup, Compatibility & Care
Setup:
- Ensure the power to the circuit is turned off.
- Strip the insulation from the conductor to the recommended length (typically indicated on the connector or in accompanying documentation).
- Lift the operating lever on the WAGO connector.
- Insert the stripped conductor fully into the connector port.
- Push the lever back down to secure the conductor.
- Repeat for the second conductor if using a 2-way connector.
Compatibility:
- Wire Types: Compatible with solid, stranded, and fine-stranded copper conductors.
- Wire Gauge: Supports AWG sizes from 20AWG to 10AWG (0.5mm² to 6mm²).
- Voltage/Current: Rated for up to 450V AC and 41A.
Care:
These connectors are maintenance-free. Ensure connections are made correctly and that the ambient temperature does not exceed 85°C. Avoid exposure to excessive moisture or corrosive elements. No lubrication or periodic tightening is required.