Dulux Trade Walls and Ceilings Vinyl Matt Paint 5L - White
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This 5L can of Dulux Trade Walls and Ceilings Vinyl Matt Paint in White is designed for DIY enthusiasts and professional decorators seeking a reliable, high-quality finish for interior walls and ceilings. Its key benefit is excellent coverage, often requiring fewer coats to achieve a smooth, even appearance that helps conceal minor surface imperfections. A key caveat is that this product is mixed to order and therefore cannot be returned or refunded.
All features
| Colour | White |
|---|---|
| Model Part Number | DXVM1115000 |
| Brand | Dulux Trade |
Extended Product Information
FAQs
What is the best way to apply this paint?
Stir the paint thoroughly before use. Apply with a brush or roller in even coats. Two coats are generally recommended for optimal coverage and finish.
How long does the paint take to dry?
The paint typically dries in 1-2 hours between coats and requires approximately 4 hours before the area can be used normally.
Can I return this paint if I change my mind?
No, this product is mixed to order and cannot be returned or refunded. Please ensure you have selected the correct color and quantity.
Is this paint suitable for bathrooms or kitchens?
While suitable for general interior walls and ceilings, this vinyl matt paint is not specifically formulated for high-moisture or high-traffic areas that require frequent washing. For bathrooms and kitchens, a vinyl silk or a dedicated kitchen/bathroom paint might be more appropriate.
How should I prepare my walls before painting?
Ensure walls are clean, dry, and free from dust, grease, and loose paint. Fill any holes or cracks and lightly sand glossy surfaces. Prime new plaster or unpainted surfaces for best results.
What does Low VOC mean?
Low VOC means the paint has a low level of Volatile Organic Compounds, which are chemicals that can be released into the air and may affect indoor air quality. This makes it a more environmentally conscious choice.
How do I clean up paint spills or tools?
Clean brushes, rollers, and any spills with water immediately after use. Ensure all tools are thoroughly rinsed.
Troubleshooting
Paint not covering evenly
Ensure the surface is properly prepared and free from dust. Stir the paint thoroughly. Apply a second coat if necessary, allowing adequate drying time between coats.
Brush marks or roller texture visible
Apply the paint evenly with consistent strokes. Avoid overworking the paint. Ensure you are using the correct application tools for the paint type and surface.
Paint appears patchy after drying
This may indicate insufficient paint application or uneven absorption by the surface. Apply another thin, even coat, ensuring full coverage.
Difficult to clean tools
Clean tools immediately after use with plenty of water. If paint has dried, a specific paint stripper may be required.
Pros and Cons
Pros
- Achieves a smooth, uniform finish that hides imperfections.
- Requires fewer coats, making the decorating process more efficient.
- Easy to apply with minimal mess.
- Quick drying time speeds up project completion.
- Low VOC content is better for indoor air quality.
Cons
- Cannot be returned or refunded as it is mixed to order.
- Matt finish may not be suitable for high-traffic areas that require frequent washing.
- White color may show dirt and marks more readily than darker shades.
Setup, Compatibility & Care
Setup:
Ensure the surface is clean, dry, and free from dust, grease, and loose paint. Fill any cracks or holes with a suitable filler and allow to dry. Lightly sand glossy surfaces to ensure adhesion.
Compatibility:
This paint is suitable for most interior walls and ceilings. It can be applied over existing emulsion paints. For best results, use a primer on new plaster or previously unpainted surfaces.
Care:
- Application: Stir the paint thoroughly before use. Apply with a brush or roller. For best results, use two coats.
- Drying: Allow approximately 1-2 hours for drying between coats and 4 hours before full use of the area.
- Cleaning: Clean brushes and rollers with water immediately after use.
- Storage: Store in a cool, dry place, away from extreme temperatures. Ensure the lid is securely fastened.