Carbon8 Sparkling Water Maker - Black
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Carbon8 Sparkling Water Maker in Black is designed for individuals and households who enjoy sparkling water but want a convenient, on-demand solution. Its key benefit is the instant, one-touch dispensing of sparkling water directly into a glass, bypassing the multi-step process of traditional carbonators. A key consideration is that the CO2 cylinder is sold separately.
All features
| Colour | Black |
|---|---|
| Model Part Number | 860009032989 |
| Brand | Carbon8 |
Extended Product Information
FAQs
Is the CO2 cylinder included with the Carbon8 Sparkling Water Maker?
No, the CO2 cylinder is not included and must be purchased separately.
How does the Click-and-Sip Technology work?
It allows you to simply touch the top control button for instant dispensing of sparkling water directly into your glass, unlike traditional methods requiring multiple steps.
What is the benefit of the mineral infusion?
The built-in chlorine filter removes impurities and adds beneficial minerals like potassium, magnesium, and calcium, improving the taste and quality of your sparkling water.
Can I carbonate beverages other than water?
The Carbon8 is primarily designed for carbonating water. While you can create flavored sparkling water by adding flavorings after carbonation, it's not recommended to carbonate liquids other than water directly, as this can damage the unit.
How often do I need to replace the filter?
Filter replacement frequency depends on usage and water quality. Please refer to the product manual for specific recommendations and replacement procedures.
What is the lifespan of a CO2 cylinder?
The lifespan of a CO2 cylinder varies based on usage. A standard cylinder typically provides enough CO2 for making around 30-60 liters of sparkling water, depending on the desired level of carbonation.
How do I clean the Carbon8 Sparkling Water Maker?
Wipe the exterior with a damp cloth. The dispensing area should be cleaned regularly. Avoid abrasive cleaners. Refer to the manual for specific cleaning instructions for internal components.
Troubleshooting
Unit not dispensing sparkling water.
Ensure the CO2 cylinder is properly installed and has sufficient gas. Check if the water reservoir is filled to the correct level. Verify the unit is powered on and the dispensing button is activated correctly.
Sparkling water is not fizzy enough.
Check the CO2 cylinder's pressure or replace it if it's low. Ensure the carbonation process was completed correctly according to the one-touch operation. Clean any potential blockages in the dispensing nozzle.
Water tastes unusual or has an odor.
Replace the internal chlorine filter if it's due for a change or if the water quality has degraded. Ensure the water reservoir is cleaned regularly to prevent stagnation.
Device powers on but does not respond to touch controls.
Unplug the unit for 30 seconds and plug it back in to reset. Ensure the touch control area is clean and dry.
Pros and Cons
Pros
- Instant sparkling water dispense with one touch.
- Unique direct-to-glass carbonation technology.
- Improves water taste with chlorine filtration and added minerals.
- Sleek and compact design fits well in modern kitchens.
- Versatile for creating various custom beverages.
Cons
- CO2 cylinder is not included and must be purchased separately.
- Relies on a proprietary carbonation system, potentially limiting CO2 cylinder options.
- Requires countertop space.
- Filter replacement will be an ongoing cost.
- Cleaning instructions for the reactor may require specific attention.
Setup, Compatibility & Care
Setup:
- Ensure the unit is placed on a stable, flat surface near a power outlet.
- Install the CO2 cylinder (sold separately) according to the manufacturer's instructions. This typically involves screwing the cylinder into the designated compartment.
- Fill the water reservoir or connect to a water source as indicated by the model (refer to specific manual if available).
- Plug in the device and follow any initial power-on prompts.
Compatibility:
- This model is designed for use with standard food-grade CO2 cylinders. Ensure you purchase a compatible cylinder.
- The built-in filter is designed to work with tap water, removing chlorine and adding minerals. Performance may vary slightly based on incoming water quality.
Care:
- Exterior: Wipe the sleek exterior with a soft, damp cloth. Avoid abrasive cleaners that could scratch the premium finish.
- Dispensing Area: Clean the area where the glass is placed regularly to maintain hygiene.
- Filter Replacement: The internal filter will need periodic replacement. Consult the product manual for recommended replacement intervals and procedures.
- CO2 Cylinder: Monitor CO2 levels and replace the cylinder when empty.