Barrettine Wood Protective Treatment - Dark Brown
Not Available
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide helps users of Barrettine Wood Protective Treatment understand how to effectively protect their outdoor timber. It is designed for those looking to extend the life of sheds, fences, and other wooden structures. The key benefit is long-lasting protection against the elements, but it's important to note that this product is not recommended for decking or garden furniture.
All features
| Colour | Brown |
|---|---|
| Model Part Number | PTDB005 |
| Brand | Barrettine |
Extended Product Information
FAQs
How much area does a 5L tin cover?
A 5L tin covers approximately 30-40m2.
Is this product suitable for decking?
No, it is not recommended for decking or garden furniture.
How long does it take for the treatment to dry?
Drying times vary depending on weather conditions. Allow it to dry completely before exposure to the elements.
Can I apply this over existing treatments?
It is best to apply it to bare wood or wood that has been properly prepared. Remove any existing coatings.
Does this product protect against UV damage?
Yes, it offers protection against UV damage.
What kind of wood can I use it on?
It is suitable for rough, sawn, or smooth timber.
What should I use to clean the brushes after use?
Clean brushes and equipment with a suitable solvent immediately after use.
Troubleshooting
Treatment appears blotchy after application.
Ensure even application. Sand the affected areas and reapply a thin, even coat.
Treatment is not drying properly.
Check the application conditions. Ensure the wood is dry and the temperature is within the recommended range. Ensure adequate ventilation.
Colour appears uneven.
Stir the product thoroughly before and during application. Apply a second coat for even colour.
Product is not adhering to the wood.
Ensure the wood is clean and free of previous coatings. Lightly sand the surface for better adhesion.
Pros and Cons
Pros
- Protects against UV damage, mould, and algae.
- Extends the lifespan of timber structures.
- Ready to use formula for ease of application.
- Covers a large area (up to 30-40m2 with a 5L tin).
- Will not harm beneficial insects or plants once dry.
Cons
- Not recommended for use on decking or garden furniture.
- Application may require multiple coats for optimal protection.
- May alter the original colour of the wood (Dark Brown).
- Requires proper surface preparation for best results.
- Solvent-based, so adequate ventilation is required during application.
Setup, Compatibility & Care
- Preparation: Ensure the wood surface is clean, dry, and free from loose paint or previous treatments. Lightly sand the wood if necessary.
- Application: Apply the treatment evenly using a brush, roller, or sprayer. Follow the manufacturer's instructions for the best results.
- Coverage: One litre typically covers 6-8m2. A 5L tin covers up to 30-40m2.
- Drying Time: Allow the treatment to dry completely before exposing the wood to the elements. Drying times may vary depending on weather conditions. Re-coat if necessary.
- Compatibility: Suitable for use on rough, sawn, or smooth timber. Do not use on decking or garden furniture.
- Care: Store in a cool, dry place. Dispose of any remaining product responsibly according to local regulations. Clean brushes and equipment with a suitable solvent immediately after use.