Laser Valve Grinders - 2 Piece Set
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Laser Tools valve grinder set is designed for automotive mechanics and DIY enthusiasts seeking a more efficient way to grind and lap engine valves. It offers a time-saving solution with versatile suction cup sizes for different valve diameters. A potential caveat is the need for proper technique to achieve optimal results.
All features
| Model Part Number | 3524 |
|---|---|
| Brand | Laser |
Extended Product Information
FAQs
What is valve lapping?
Valve lapping is a process used in engine rebuilding to create a precise seal between the engine valve and its seat. It involves using an abrasive compound to grind the valve face against the seat, ensuring a perfect match and preventing leaks.
Do I need a special compound for these grinders?
Yes, you will need a separate valve grinding compound. This abrasive paste is what does the actual grinding. The grinders themselves are the tools to apply the compound and rotate the valve.
How do I choose the right suction cup size?
Select the suction cup that provides the best, most secure fit across the surface of the valve face without overlapping the edges too much or being significantly smaller than the valve face.
Can these be used for intake and exhaust valves?
Yes, these grinders are suitable for both intake and exhaust valves, provided you select the correct suction cup size for each.
How often should I replace the suction cups?
The suction cups should be replaced if they show signs of significant wear, cracking, or if they no longer maintain a secure grip on the valve face.
What is the benefit of wooden handles?
Wooden handles are often preferred for their comfortable grip, good insulation from heat, and durability in a workshop environment. They provide a solid feel and allow for good control during the lapping process.
Troubleshooting
Suction cup not gripping the valve.
Ensure the valve face and the suction cup are clean and dry. Apply slight pressure when attaching the cup. If the cup appears damaged or worn, try a different size or consider replacement.
Uneven grinding pattern.
Check if you are using consistent pressure and rotation. Ensure the valve and seat are clean of debris. Verify you are using the correct size suction cup for the valve.
Handle feels loose.
Check the connection between the handle and the shaft. Ensure it is securely fastened. If it is a wooden handle, check for any cracks or damage.
Pros and Cons
Pros
- Versatile with four different suction cup sizes.
- Comfortable wooden handles improve usability.
- Efficiently grinds and laps valves.
- Durable construction for workshop environments.
- Saves time on engine maintenance tasks.
Cons
- Requires a separate lapping compound.
- Effectiveness depends on user technique.
- Not suitable for extremely large or unusually shaped valves.
- Basic design; no advanced features.
Setup, Compatibility & Care
Setup: No complex setup is required. Select the suction cup size that best matches the valve you are working on. Ensure the suction cup is clean and dry before attaching it firmly to the valve face. Apply a small amount of valve grinding compound to the valve seat or valve face.
Compatibility: This set is compatible with most standard automotive poppet valves. The four included suction cup sizes (16mm, 20mm, 29mm, 35mm) cover a broad range of common valve diameters.
Care: After use, clean the suction cups thoroughly with warm water and mild soap to remove any residual grinding compound or debris. Dry the tools completely before storing. Store in a dry place to prevent rust on the metal components. Periodically inspect the suction cups for signs of wear or damage.