Frenchic Paint - Stormy
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
For DIY enthusiasts and homeowners seeking a sophisticated, muted grey with a hint of lilac for interior and exterior projects, Frenchic Paint in 'Stormy' offers an eco-friendly, versatile solution. Its key benefit lies in its self-priming, self-sealing, water-based formula that adheres to a wide range of surfaces with minimal preparation. A potential caveat is its matte finish, which may require extra care in high-traffic or very wet areas.
All features
| Colour | Grey |
|---|---|
| Model Part Number | 31448024219735 |
| Brand | Frenchic |
Extended Product Information
FAQs
What surfaces can I use Frenchic 'Stormy' paint on?
You can use it on wood, laminate, UPVC/composites, metal, and ceramic wall tiles (excluding very wet areas like shower surrounds). It's also great for kitchen cupboards, front doors, and interior floors.
Do I need a primer or topcoat with this paint?
No, Frenchic 'Stormy' is self-priming and self-sealing. It does not typically require a separate primer or topcoat for most applications.
How should I clean my painted surface?
Wipe clean with a damp cloth. Avoid using abrasive cleaners or harsh chemicals to maintain the finish.
Is this paint suitable for outdoor use?
Yes, it is weatherproof and hard-wearing, making it suitable for exterior projects like front doors and garden furniture.
What is the coverage rate for a 750ml tin?
A 750ml tin covers up to 12.5m² per coat. Two coats are recommended for a durable finish, so expect coverage of approximately 6m² for a two-coat application.
Can this paint be used on children's toys?
Yes, it is EN71-3 certified, meaning it's safe for use on children's toys.
What kind of finish does 'Stormy' provide?
It provides a matte, low-sheen finish.
Troubleshooting
Paint is not adhering well
Ensure the surface was properly cleaned and free from dust or grease before application. For very glossy surfaces, a light sanding may be beneficial.
Uneven finish or brush marks visible
Ensure paint was stirred thoroughly. Apply thin, even coats. Avoid overworking the paint. Use a high-quality brush or roller designed for water-based paints.
Paint seems too thick to apply
Stir the paint vigorously. If still thick, a very small amount of water (less than 5%) can be added, but this is generally not recommended and may affect performance.
Surface remains tacky after drying
This can occur in humid conditions or if applied too thickly. Ensure adequate ventilation and allow more drying time. If the issue persists, consider a very light buffing with a soft cloth.
Pros and Cons
Pros
- Excellent adhesion to multiple substrates like laminate and UPVC.
- Durable and weatherproof for outdoor use.
- Safe formulation for use around children and pets.
- Reduced preparation time due to self-priming and self-sealing properties.
- Aesthetically pleasing matte finish.
- Environmentally conscious with low VOC content.
Cons
- Matte finish may not be ideal for very wet areas like shower enclosures.
- Requires two coats for optimal durability and coverage.
- May require additional sealing in extremely harsh weather conditions.
- The 'Stormy' grey is nuanced; test a sample if a pure grey is desired.
Setup, Compatibility & Care
Preparation: Ensure surfaces are clean, dry, and free from grease or dust. For most surfaces like wood and laminate, minimal preparation is needed. For very glossy surfaces, a light scuff sand might improve adhesion, though it is often not required.
Compatibility: This paint is suitable for wood, laminate, UPVC/composites, metal, and ceramic wall tiles (avoiding very wet areas). It is also recommended for kitchen cupboards, front doors, interior wood floors, and concrete floors.
Application: Stir well before use. Apply with a good quality brush or roller. Two coats are recommended for best results. Allow adequate drying time between coats.
Care: Clean up spills and brushes with water. For the finished painted surface, wipe clean with a damp cloth. Avoid abrasive cleaners.