Bartoline Wood Glue - 4 x 250mL
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
Bartoline Wood Glue is an ideal adhesive solution for DIY enthusiasts, professional woodworkers, and homeowners who need a reliable, water-resistant bonding agent for interior and exterior joinery. Its primary strength lies in its high-performance resin-based formula that offers rapid bonding for diverse materials such as hardwood, softwood, MDF, and chipboard. While it excels in high-humidity environments like kitchens and bathrooms, users should note that surfaces must be perfectly clean and properly clamped to ensure the promised bond strength is fully realized within the 24-hour curing period.
All features
| Model Part Number | null} </code> |
|---|---|
| Brand | Bartoline |
Extended Product Information
FAQs
Can this glue be used outdoors?
While it meets D3 water resistance standards for interior high-humidity areas, it is primarily designed for interior use or protected exterior environments.
Does this glue work on MDF?
Yes, it is highly effective on MDF, chipboard, and all common wood species.
How long should I clamp the wood?
We recommend clamping for at least 30 to 60 minutes for initial stability, though it takes 24 hours for the bond to cure completely.
Is the glue toxic?
As with any adhesive, it should be used in a well-ventilated area and kept out of reach of children.
Can I paint over the dried glue?
Yes, once the glue has fully cured and dried clear, it can generally be painted or stained, though it is always recommended to test on a small scrap piece first.
How do I remove wet glue?
Use a clean, damp cloth or sponge to wipe away any excess glue immediately after joining the parts.
Troubleshooting
Glue did not set firmly after a few hours
The adhesive requires 24 hours to reach full strength. If the pieces were moved too early, the bond may have been compromised.
Visible glue residue after drying
If the excess was not wiped away immediately, you may need to gently sand the area once the glue is fully hardened.
Difficulty bonding oily or treated woods
Sand the surfaces lightly to open the grain and remove surface contaminants before re-applying the glue.
Pros and Cons
Pros
- Dries clear for seamless visual results
- Excellent resistance to humidity and moisture
- Strong, reliable bond on engineered woods like MDF
- Compliant with international industry standards for durability
Cons
- Requires 24 hours to reach full structural bond strength
- Excess glue must be cleaned immediately before drying
- Not suitable for load-bearing structural timber framing
Setup, Compatibility & Care
To ensure optimal performance, start by ensuring that all surfaces are free of dust, oils, or waxes, as these will prevent the glue from penetrating the wood fibers. Apply a thin, even coat to one of the surfaces and join them immediately. For maximum strength, use woodworking clamps or heavy weights to hold the pieces firmly in position. If any excess glue squeezes out of the joint, wipe it away instantly with a damp cloth; once cured, the adhesive becomes significantly harder to remove. Store the bottles in a cool, dry place and ensure the cap is tightly closed to prevent the contents from drying out prematurely.