Cuprinol Garden Furniture Restorer - 1L, Clear
Not Available
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide provides essential information for users of Cuprinol Garden Furniture Restorer. It's designed for anyone looking to revitalize weathered wooden furniture, restoring its original color in just 15 minutes. While the restorer is effective, remember to protect surrounding plants and grass during application to avoid potential damage. This guide will cover key features, usage instructions, and troubleshooting tips to ensure successful results.
All features
| Model Part Number | 5083467 |
|---|---|
| Brand | Cuprinol |
Extended Product Information
FAQs
How much area does one liter of restorer cover?
One liter of Cuprinol Garden Furniture Restorer typically covers up to 8 m².
Can I use this product on painted furniture?
No, this product is only suitable for bare or previously oiled wood.
How long should I leave the restorer on the wood?
Leave it on until no further lightening occurs, but for no more than 15 minutes.
What should I do if the restorer splashes on my plants?
Dilute the affected area immediately with plenty of water.
How long does it take for the furniture to dry?
Allow the furniture to dry thoroughly for 16 hours before use or applying a protective finish.
What tools do I need?
You'll need a brush, a mild abrasive scrubbing pad or stiff bristle brush, and a watering can or hose for rinsing. Protective gloves are also recommended.
Can I use a pressure washer to rinse the furniture?
No, do not use a high-pressure washer.
Where can I dispose of leftover product?
Take leftover product to a Community RePaint collection point.
Troubleshooting
Restorer isn't lightening the wood.
Ensure the product is applied evenly. Scrub the surface more vigorously. If the wood is severely weathered, a second coat may be necessary.
White residue remains after rinsing.
Rinse the furniture again thoroughly with water. Ensure all restorer is removed.
The product damaged plants or grass.
Immediately dilute the affected area with copious amounts of water.
Furniture still looks grey after treatment.
Sand the wood to remove any loose fibres and give a smooth base before finishing with an appropriate oil or stain.
Pros and Cons
Pros
- Quickly restores weathered wood.
- Easy application process.
- Prepares wood for staining or oiling.
- Water-based formula.
- Provides good surface coverage.
- Suitable for various types of garden furniture.
Cons
- Requires protection of surrounding plants.
- Not suitable for use in temperatures below 5°C.
- May require multiple coats for severely weathered wood.
- Drying time of 16 hours.
- Avoid contact with grass or plants.
- Requires a mild abrasive scrubbing pad or stiff bristle brush.
Setup, Compatibility & Care
Setup
- Preparation: Remove excessive dirt, algae, and any loose coatings from the furniture surface using a scraper or stiff brush.
- Application: Stir the restorer thoroughly. Apply liberally with a paintbrush.
- Scrubbing: Immediately after application, work the restorer into the wood using a mild abrasive scrubbing pad or a stiff bristle brush.
- Dwell Time: Leave the restorer on the wood for up to 15 minutes, or until the lightening effect stops.
- Rinsing: Rinse with plenty of water using a watering can or hose. Avoid high-pressure washers.
- Drying: Allow the furniture to dry completely for at least 16 hours before use or applying any protective finish.
Compatibility
- Suitable for: Bare or previously oiled wood furniture.
- Not Suitable for: Use in temperatures below 5°C or if rain is expected before the job is complete. Not suitable for indoor use.
Care
- Storage: Store in moderate temperatures, away from extreme conditions.
- Cleaning: Clean brushes with water after use.
- Safety: Always wear protective gloves when using. Protect surrounding plants and grass during application.