Cuprinol 5 Star Complete Wood Treatment - 2.5L
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for homeowners and DIY enthusiasts seeking to protect their wood from insect attack and fungal decay. The Cuprinol 5 Star Complete Wood Treatment offers long-lasting protection with a low-odour, water-based formula. A key consideration is that drying time can extend in confined areas, so proper ventilation is important.
All features
| Brand | Cuprinol |
|---|
Extended Product Information
FAQs
How long does it take for the treatment to dry?
Typically, the treatment dries in 1-3 days. However, drying time may extend in confined areas, so ensure good ventilation.
How many coats of treatment are needed?
Apply 2-3 coats for optimal protection. Allow each coat to soak in before applying the next.
Can Cuprinol 5 Star Wood Treatment be used on painted wood?
No, it is recommended that you remove any paint or existing finishes before applying Cuprinol 5 Star Wood Treatment.
Is this product suitable for use on decking?
Yes, it is suitable for decking. Ensure proper preparation and application for the best results. However, consider a product specifically designed for decking if anti-slip properties are needed.
How do I clean up after using the product?
Clean brushes and any equipment with water immediately after use, once any excess product has been removed.
Is the product safe to use around pets and children?
While the product is low-odour and water-based, it's recommended to keep pets and children away from the treated area until it is fully dry.
Troubleshooting
Treatment not soaking into the wood.
Ensure the wood is clean and dry. Lightly sand the surface if necessary. Apply thinner coats.
Slow drying time.
Ensure adequate ventilation. The drying time may be extended in confined spaces. Check the temperature and humidity levels.
Pros and Cons
Pros
- Low odour formulation.
- Water based.
- Kills woodworm and prevents re-infestation.
- Suitable for interior and exterior use.
- Long lasting protection.
Cons
- Drying time of 1-3 days (may extend in confined areas).
- Requires 2-3 coats for optimal protection.
- Proper ventilation is required during application and drying.
- Not a preventative treatment for existing structural issues.
Setup, Compatibility & Care
- Preparation: Ensure the wood surface is clean, dry, and free from old finishes.
- Application: Apply 2-3 coats using a brush, allowing each coat to soak in before applying the next.
- Drying: Allow 1-3 days for drying, longer in confined areas. Ensure good ventilation.
- Clean Up: Clean brushes and equipment with water immediately after use.
- Compatibility: Suitable for use on a variety of wood types, including rough sawn and smooth planed timber. Test in an inconspicuous area first.
- Storage: Store in a cool, dry place, away from direct sunlight.