Alu Lube Aluminium High Temperature Lubricant 500mL - Aerosol Solutions
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
Alu Lube is designed for industrial and mechanical applications requiring superior anti-seize protection for aluminum components, particularly in high-temperature environments. Its key benefit is long-lasting protection against pitting, distortion, and seizure, ensuring component integrity. A potential caveat is its specialized formulation, which may not be suitable for all materials or applications outside its intended high-temperature range.
All features
| Model Part Number | ASO0410 |
|---|---|
| Brand | Aerosol Solutions |
Extended Product Information
FAQs
What is the maximum temperature Alu Lube can withstand?
Alu Lube is effective up to 800°C (1472°F).
Can Alu Lube be used on steel components?
While primarily formulated for aluminum, it may offer anti-seize properties on steel. However, testing on a small area is recommended to ensure compatibility and performance.
How should I prepare the surface before applying Alu Lube?
The surface should be clean, dry, and free from grease, oil, or any contaminants. Degreasing is recommended for optimal adhesion and performance.
How long does the anti-seize protection last?
The protection is long-lasting, designed to withstand repeated heating and cooling cycles common in high-temperature applications.
Is Alu Lube suitable for general lubrication tasks?
Alu Lube is specifically formulated as a high-temperature anti-seize and may not be ideal for general lubrication needs. For those, a different type of lubricant might be more appropriate.
What is the shelf life of Alu Lube?
Under proper storage conditions (cool, dry, away from heat), the product typically maintains its efficacy for several years. Refer to the can for any specific expiry information.
Troubleshooting
Uneven spray or nozzle blockage
Ensure the can was shaken thoroughly before use. If blockage persists, remove the nozzle and clean it with a suitable solvent or replace it.
Product not dispensing
Check that the nozzle is properly attached. If the can has been used recently, it may be empty. Ensure the actuator is not clogged.
Lubricant appears to be separating
Shake the can more vigorously and for a longer duration (at least two minutes) before application to ensure proper mixing of the heat-stable lubricants.
Pros and Cons
Pros
- Provides robust protection in extreme heat (up to 800°C).
- Effectively prevents components from seizing, simplifying maintenance.
- Protects against mechanical damage like pitting and distortion.
- Easy to apply evenly with aerosol packaging.
- Formulated with high-quality, heat-stable lubricants.
Cons
- Primarily designed for aluminum; compatibility with other materials should be verified.
- May be overkill for low-temperature or light-duty applications.
- Aerosol can requires proper storage and handling.
Setup, Compatibility & Care
Setup:
- Ensure the surface to be treated is clean, dry, and free from grease or debris. For best results, degrease the area.
- Shake the aerosol can vigorously for at least two minutes before use to ensure thorough mixing of the contents.
- Hold the can upright and spray from a distance of 15-20 cm, applying a thin, even coat to the relevant surfaces (e.g., threads, contact points).
Compatibility:
- Primarily formulated for use on aluminum and its alloys.
- Test on a small, inconspicuous area if unsure about compatibility with other metals or materials.
Care:
- Store the aerosol can in a cool, dry place, away from direct sunlight and sources of ignition.
- Do not expose to temperatures exceeding 50°C (122°F).
- Puncture or incinerate the can only when empty.