Granville Petro Patch Putty - Grey - 0455
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for users of Granville Petro Patch Putty, a hand-kneadable epoxy putty designed for fast and permanent repairs on ferrous metals and aluminum. The key benefit is its ability to quickly seal leaks and cracks without needing tools, but be aware that it's only effective on the specified materials. This putty, supplied in a rod form, offers a no-mess application and dries to a dark grey color, ready for priming and painting.
All features
| Colour | Grey |
|---|---|
| Model Part Number | 0455 |
| Brand | Granville |
Extended Product Information
FAQs
What materials can I use this putty on?
Granville Petro Patch Putty is designed for use on ferrous metals and aluminum.
How long does it take for the putty to cure?
The curing time is typically about an hour, but it may vary depending on the temperature.
Can I paint over the putty?
Yes, once the putty has fully cured, you can sand, prime, and paint it.
Is it safe to use on fuel tanks?
Yes, it is suitable for repairing leaks in petrol and diesel tanks.
Does the putty come in different colors?
No, the putty dries to a dark grey color.
How should I store the putty?
Store the putty in a cool, dry place and keep it out of the reach of children.
Can I use this on plastic?
No, it is not recommended for use on plastic or non-metal surfaces.
Troubleshooting
Putty not hardening
Ensure you have thoroughly mixed the putty until the color is uniform. Check the expiry date; old putty may not cure properly. Make sure the ambient temperature is suitable for curing.
Poor adhesion
Thoroughly clean and prepare the surface before applying. Ensure the surface is dry and free of contaminants like oil or grease.
Putty cracking after curing
Ensure the putty is applied in a thick enough layer to fill the crack. For very deep cracks, apply the putty in multiple layers, allowing each layer to cure before applying the next.
Pros and Cons
Pros
- Easy to apply with no tools needed.
- Provides a fast and permanent repair.
- Suitable for a wide range of materials (ferrous metals and aluminum).
- Non-rusting formula ensures durability.
- Can be painted over for a seamless finish.
- Effective for both petrol and diesel tanks.
Cons
- Limited to use on ferrous metals and aluminum.
- Not suitable for structural repairs on high-stress areas.
- Requires proper surface preparation for optimal adhesion.
- Curing time is dependent on environmental conditions.
- May not be ideal for extremely intricate repairs.
Setup, Compatibility & Care
- Preparation: Clean the surface thoroughly using a wire brush or sandpaper to remove rust, paint, or any contaminants. Ensure the area is dry before applying the putty.
- Mixing: Cut off the required amount of putty from the rod. Knead the putty thoroughly until it becomes a uniform color. This usually takes about a minute.
- Application: Apply the mixed putty to the damaged area, pressing firmly to ensure good contact. Shape the putty as needed.
- Curing: Allow the putty to cure completely. The curing time will vary depending on the temperature, but it typically takes about an hour.
- Finishing: Once cured, the putty can be sanded, primed, and painted to match the surrounding surface.
Compatibility:
- Compatible with ferrous metals and aluminium.
- Not recommended for use on plastic or non-metal surfaces.
Care:
- Store the putty in a cool, dry place.
- Keep out of reach of children.
- Avoid contact with skin and eyes. In case of contact, rinse thoroughly with water.