Godox ML150II Macro Ring Flash - GN12
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Godox ML150II Macro Ring Flash is designed for photographers seeking shadow-less, close-up illumination. Its dual-flash tube encircles your lens, providing even light for intricate subjects. While versatile for many close-up scenarios, users should note that it requires AA batteries (not included) and has a single-contact hot shoe.
All features
| Brand | Godox |
|---|
Extended Product Information
FAQs
What type of batteries does the Godox ML150II use?
It uses 4 x AA batteries. Alkaline or Ni-MH rechargeable batteries are recommended. Batteries are not included.
What lens sizes can this ring flash be used with?
It comes with adapter rings for lenses with filter thread diameters of 49mm, 52mm, 55mm, 58mm, 62mm, 67mm, 72mm, and 77mm.
Does this flash support TTL?
The ML150II features a single-contact hot shoe for basic flash firing. Full TTL compatibility depends on your specific camera model, but it primarily operates in manual mode.
How do I adjust the flash power?
The flash offers 6 stops of power output control, adjustable from 1/32 to 1/1 in 1/2 stop increments using the control dial on the unit.
Can I control the two flash tubes independently?
The Godox ML150II features two independent tubes that encircle the lens, providing shadow-less illumination. While they function as a pair to create even light, they are not designed for independent power control.
What is the guide number for this flash?
The guide number for the Godox ML150II Macro Ring Flash is GN12 (ISO 100, in meters).
Is this flash suitable for video?
While it provides continuous illumination when not firing, it is designed as a stroboscopic flash for photography. For continuous video lighting, a dedicated LED light would be more appropriate.
Troubleshooting
Flash does not fire
Ensure batteries are correctly inserted and charged. Check that the flash is securely mounted on the camera's hot shoe. Verify the camera's flash settings and test the flash in manual mode. Ensure the hot shoe contact is clean.
Uneven or insufficient lighting
Adjust the brightness and power output settings on the flash unit. Ensure the flash tubes are evenly positioned around the lens. Check for any obstructions between the flash and the subject.
Flash struggles to recycle
Replace or recharge the AA batteries. Using lower power settings will also reduce recycle time.
Flash is loose on the lens
Ensure the correct size adapter ring is being used and that it is screwed on securely to both the lens and the flash unit.
Pros and Cons
Pros
- Provides even, shadow-free illumination crucial for macro details.
- Offers a wide range of brightness and power adjustments for creative control.
- Accommodates a broad spectrum of lens sizes with included adapter rings.
- Lightweight construction enhances portability and handling.
- Compatible with most camera systems via a standard single-contact hot shoe.
Cons
- Requires 4 x AA batteries, which are not included.
- The single-contact hot shoe may not be compatible with all advanced TTL systems.
- Focusing light directly in front of the lens can sometimes be challenging for very tight spaces.
- Maximum guide number is GN12, which might be insufficient for very distant macro shots.
- No built-in rechargeable battery, relying solely on AA power.
Setup, Compatibility & Care
Setup:
- Ensure your camera is turned off before attaching the flash.
- Select the appropriate adapter ring for your lens diameter (49, 52, 55, 58, 62, 67, 72, or 77mm).
- Screw the adapter ring onto the front of your camera lens.
- Mount the Godox ML150II ring flash onto the adapter ring.
- Slide the flash's hot shoe onto your camera's hot shoe mount until it clicks securely.
- Insert 4 x AA batteries (alkaline or Ni-MH recommended) into the battery compartment.
- Turn on your camera and then the flash unit.
Compatibility:
- The single-contact hot shoe is compatible with most cameras that have a standard ISO hot shoe. It provides basic flash firing. Advanced TTL functions may not be supported by all camera models.
- Adapter rings are provided for lens filter thread sizes: 49mm, 52mm, 55mm, 58mm, 62mm, 67mm, 72mm, and 77mm.
Care:
- Avoid exposing the flash unit to extreme temperatures or moisture.
- Clean the exterior of the flash unit with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Periodically check the battery contacts for corrosion and clean them if necessary.
- Store the flash in a protective case when not in use to prevent dust and damage.