Frenchic Riad Red Al Fresco - 250ml
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for DIY enthusiasts and homeowners looking for a versatile, high-quality paint. The key benefit is its multipurpose, durable, and easy-to-use formula that provides a beautiful matte finish for various surfaces. A potential caveat is its coverage rate, requiring careful calculation for larger projects. Frenchic Riad Red Al Fresco is an elegant, deep Heritage red with a hint of warm Moorish spice, suitable for indoor and outdoor use. It offers a weatherproof, hardwearing matte finish and is self-priming, self-sealing, and water-based.
All features
| Colour | Red |
|---|---|
| Model Part Number | 55774540038528 |
| Brand | Frenchic |
Extended Product Information
FAQs
Do I need to use a primer with this paint?
No, Frenchic Al Fresco paint is self-priming, meaning you can apply it directly to most prepared surfaces without a separate primer.
Can I use this paint on bathroom tiles?
It is suitable for ceramic wall tiles but should be avoided in very wet areas like shower enclosures. Ensure good ventilation.
How long does it take for the paint to fully cure?
While the paint is touch-dry in a few hours, it typically takes 7-14 days to fully cure and reach its maximum hardness and durability.
What is the coverage rate?
A 250ml tin will cover approximately 2 square meters, depending on the surface porosity and application thickness.
Is this paint safe for children's furniture?
Yes, this paint is certified EN71-3 safe, making it suitable for use on children's toys and furniture.
How should I clean up paint brushes and equipment?
As it is water-based, simply clean brushes, rollers, and any spills with warm soapy water immediately after use.
Can this paint be used on metal garden furniture?
Yes, it is suitable for metal surfaces and provides a weatherproof, hardwearing finish for outdoor use.
Troubleshooting
Paint is too thick or streaky
Stir the paint thoroughly. If still too thick, add a tiny amount of water (no more than 5%) and mix well. Apply in thin coats.
Poor adhesion or chipping
Ensure the surface was clean and dry before application. Lightly sand glossy surfaces before painting. Apply an additional thin coat.
Uneven color finish
Ensure sufficient paint has been applied in thin, even coats. Allow proper drying time between coats. Stir paint well before and during use.
Surface remains tacky after drying
Ensure adequate drying time and conditions (avoid high humidity). Apply thinner coats. Full cure can take up to two weeks.
Pros and Cons
Pros
- Versatile for many surfaces and applications
- Durable and weatherproof finish
- No need for separate primer or sealer
- Easy water-based cleanup
- Safe for use on children's items
- Elegant and unique color
Cons
- Coverage may be limited on porous surfaces (2m² per 250ml)
- Not recommended for very wet areas (e.g., shower tiles)
- Requires multiple thin coats for best results
Setup, Compatibility & Care
Preparation: Ensure surfaces are clean, dry, and free from grease or dust. Lightly abrading glossy surfaces can improve adhesion. No primer is needed for most surfaces.
Application: Stir the paint thoroughly before use. Apply thin, even coats using a good quality brush or roller. Allow adequate drying time between coats, typically 2-4 hours, though this can vary with humidity and temperature. Multiple thin coats are generally better than one thick coat.
Compatibility: Suitable for furniture, woodwork, laminate, powder-coated radiators, metal, uPVC, ceramic wall tiles (avoiding very wet areas), kitchen cupboards, front doors, and interior wood and concrete floors. Do not use on very damp surfaces.
Care: Once fully cured (typically 7-14 days), the finish is hardwearing and can be cleaned with a damp cloth and mild soap if necessary. Avoid abrasive cleaners.