JB Weld SteelStik Reinforced Epoxy Putty - Grey - 57g (2oz)
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for professionals and DIYers undertaking demanding metal repair tasks. The JB Weld SteelStik Reinforced Epoxy Putty offers a robust, steel-reinforced solution for sealing leaks, filling cracks, and rebuilding damaged metal components, providing a convenient hand-mixable format. A key caveat is its relatively fast 5-minute set time, which requires prompt application once mixed.
All features
| Colour | Grey |
|---|---|
| Model Part Number | 57g (2oz) |
| Brand | JB Weld |
Extended Product Information
FAQs
What is the working time for J-B Weld SteelStik?
J-B Weld SteelStik has a 5-minute set time. This means you should mix and apply it within 5 minutes of combining the resin and hardener.
How long does it take to fully cure?
SteelStik begins to set in 5 minutes and achieves handling strength within an hour. For maximum strength and machinability, allow it to cure for 24 hours.
Can I use SteelStik on materials other than metal?
SteelStik is primarily designed for metal applications. While it may adhere to some other materials, its performance and durability are optimized for ferrous and non-ferrous metals.
Can SteelStik be drilled and tapped?
Yes, once fully cured (typically after 24 hours), J-B Weld SteelStik can be drilled, tapped, sanded, filed, and painted.
How should I store unused putty sticks?
Store unused putty sticks in their original packaging in a cool, dry place. Ensure the packaging is tightly sealed to prevent exposure to air, which can cause premature hardening.
What is the bond strength of SteelStik?
J-B Weld SteelStik offers a bond strength of up to 4000 PSI once fully cured.
Does the color change during mixing?
Yes, you will knead the putty until it achieves a uniform dark grey color, indicating the resin and hardener are thoroughly mixed.
Troubleshooting
Putty does not harden
Ensure the putty was kneaded thoroughly until a uniform grey color was achieved. If the product is old or has been exposed to air, its efficacy may be reduced. Check the expiration date if available.
Putty is too stiff to knead
This can occur in very cold temperatures. Try warming the putty slightly by holding it in your hands for a few minutes before attempting to mix.
Poor adhesion to the surface
The surface was likely not properly prepared. Ensure it was clean, dry, and free from contaminants like oil or rust. Lightly sanding the surface before application can improve bond strength.
Putty cures too quickly
The 5-minute set time requires prompt application. For larger repairs, consider using smaller amounts of putty at a time to manage the working window.
Pros and Cons
Pros
- High bond strength of 4000 PSI for reliable repairs.
- Fast 5-minute set time speeds up work.
- Easy to use, no mixing tools required.
- Versatile; can be machined after curing.
- Suitable for a wide range of metal repair applications.
- Bulk packaging is economical for professional use.
Cons
- The 5-minute set time requires quick work and may be challenging for beginners.
- Curing time can vary based on temperature and humidity.
- Color may not perfectly match all metal finishes.
- Requires thorough surface preparation for optimal adhesion.
- Not suitable for applications involving extreme heat beyond its rating.
Setup, Compatibility & Care
Preparation is Key: Before applying SteelStik, ensure the repair area is clean, dry, and free from grease, oil, or rust. Sanding the surface slightly can improve adhesion.
Application: Cut off the required amount of putty. Knead the two parts together by hand until a uniform grey color is achieved. This indicates the resin and hardener are fully mixed. Apply the mixed putty immediately to the prepared surface, pressing firmly to ensure good contact.
Curing: SteelStik has a 5-minute set time, during which the material will begin to harden. Full cure is typically achieved within 1 hour, but strength continues to develop over 24 hours. Avoid stressing the repaired area during the initial curing period.
Machining: Once fully cured, SteelStik can be drilled, tapped, sanded, filed, and painted. Use standard hand or power tools for these operations.
Care: Store unused putty sticks in their original packaging in a cool, dry place away from direct sunlight. Ensure the packaging is sealed to prevent premature hardening.
Compatibility: SteelStik is designed for bonding and repairing various metals, including steel, iron, aluminum, brass, and copper. It is not recommended for use on plastics or certain flexible materials.