JCP Fixings Eta Option 7 - White - Box of 12
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The JCP Fixings Eta Option 7 is a white, styrene-free polyester injection resin designed for professionals and DIY enthusiasts needing reliable anchoring and bonding in concrete, brick, and masonry. Its CE certification ensures high-performance adhesion, while the reduced odour makes it suitable for internal applications. Supplied in a box of 12, it offers a convenient solution for multiple fixing jobs, though users should be aware it requires standard injection equipment for application.
All features
| Colour | White |
|---|---|
| Model Part Number | Eta Option 7 |
| Brand | JCP products |
Extended Product Information
FAQs
What type of materials can this resin be used with?
The JCP Fixings Eta Option 7 is suitable for use in concrete, brick, and general masonry.
Do I need special equipment to apply this resin?
Yes, you will need standard injection equipment, such as a caulk gun designed for resin cartridges.
Is this product safe for indoor use?
Yes, it is suitable for internal use due to its styrene-free formula and reduced odour.
How many cartridges are included in a box?
A box contains 12 cartridges.
What does CE certified mean for this product?
CE certification indicates that the product meets European health, safety, and environmental protection standards for products sold within the European Economic Area, assuring its performance and reliability for anchoring applications.
Can this resin be used for exterior applications?
While designed for internal use, its high-performance adhesion suggests potential for exterior applications. However, always consult the product's technical data sheet for specific environmental limitations and recommendations.
What is the weight of the product?
The weight is listed as 1.29 pounds, referring to the total weight of the box of 12 cartridges.
Troubleshooting
Resin not dispensing correctly
Ensure the cartridge is properly seated in the injection gun and the nozzle is correctly attached. Check for any blockages in the nozzle or internal components of the gun. Verify the correct type of injection gun is being used for resin cartridges.
Poor adhesion or bond failure
Confirm the substrate was clean, dry, and free from contaminants before application. Ensure the correct amount of resin was used and that it was allowed to cure fully according to the product's specifications. Check for compatibility with the specific material being bonded.
Resin cures too slowly or not at all
Verify the ambient temperature is within the recommended range for application. Lower temperatures can significantly slow down the curing process. Ensure the resin has not expired and was stored correctly.
Pros and Cons
Pros
- CE certified for safety and performance.
- Reduced odour is beneficial for indoor applications.
- High-performance adhesion ensures secure and lasting fixings.
- Suitable for a variety of building materials.
- Comes in a convenient multi-pack for larger jobs.
Cons
- Requires specialized injection equipment for application.
- Styrene-free formula may have different curing times compared to traditional resins.
- Primarily for internal use; external performance characteristics are not detailed.
- Weight of 1.29 pounds per box suggests it's a dense material.
Setup, Compatibility & Care Instructions
To use the JCP Fixings Eta Option 7, you will need standard injection equipment, typically a caulk gun designed for resin cartridges. Ensure the substrate (concrete, brick, or masonry) is clean, dry, and free from dust and debris before application. For optimum results, follow the specific instructions provided with the injection equipment regarding nozzle insertion and dispensing. The resin is compatible with most standard injection guns.
Care: Store the cartridges in a cool, dry place, away from direct sunlight and extreme temperatures. Once opened, follow the manufacturer's guidelines for shelf life and storage of partially used cartridges. Clean any spills immediately with appropriate solvents, as recommended by safety data sheets, and ensure good ventilation during and after application, especially when used indoors.