Stans Biobased Grease - 100g
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
Stan's Biobased Grease (100g) is an eco-friendly, all-purpose lubricant for cyclists prioritizing environmental responsibility without compromising performance. It effectively lubricates bicycle bearings, bushings, wheels, and headsets, offering superior corrosion resistance and protection for rubber components. While its biodegradable formula is a major advantage, users should note its specific formulation is optimized for bicycle components and may not be suitable for all industrial applications.
All features
| Model Part Number | 305-00001 |
|---|---|
| Brand | Stans NoTubes |
Extended Product Information
FAQs
Is Stan's Biobased Grease truly biodegradable?
Yes, the grease is formulated with natural ingredients and is USDA-certified biobased, meaning it is designed to break down naturally in the environment.
Can I use this grease on my suspension fork stanchions?
While safe for elastomers, it's primarily an assembly and bearing grease. Specialized suspension lubricants are recommended for stanchions and seals for optimal fork performance.
How often should I re-grease my bike components?
Maintenance intervals vary. For average use, re-greasing hubs, headsets, and bottom brackets every 6-12 months is common. Check your component manufacturer's recommendations and inspect the grease's condition regularly.
What is the difference between this and a synthetic grease?
Biobased greases use renewable natural resources, prioritizing environmental impact. Synthetic greases are often engineered for extreme temperature stability or specific high-load applications, but may not be biodegradable.
Is this grease suitable for high-pressure applications?
This grease is formulated for general bicycle component lubrication, not typically for extreme high-pressure industrial applications. It offers good protection for standard bicycle bearing loads.
Will this grease damage plastic parts on my bike?
The grease is safe for rubber and elastomers. While generally compatible with most bicycle plastics, testing on an inconspicuous area is always recommended if unsure, though damage is unlikely.
Troubleshooting
Grease feels too stiff in cold weather
While designed for a wide range, extremely low temperatures might increase viscosity. Ensure proper application; the grease should still allow for movement. If stiffness is severe, consider a specialized cold-weather lubricant for extreme conditions.
Water appears to be separating from the grease
Minor separation can occur over time, especially if exposed to significant moisture. Stir the grease to re-homogenize. If significant water contamination is present, clean and re-grease the component.
Component movement feels gritty after application
This usually indicates that the old grease was not fully removed, or contaminants were introduced during application. Disassemble, thoroughly clean all parts, and reapply fresh grease carefully.
Pros and Cons
Pros
- Environmentally responsible and biodegradable formula
- Excellent corrosion protection for metal parts
- Safe for use with rubber and elastomer seals
- Wide operating temperature range for consistent performance
- Versatile application across multiple bicycle components
- Waterproof properties enhance durability in various conditions
Cons
- Primarily designed for bicycle applications, may not be a universal lubricant
- Being biobased, long-term stability in extreme industrial conditions might differ from petroleum-based greases
- Specific reapplication intervals may vary more than traditional greases depending on use
Setup, Compatibility & Care
Application:
- Clean the component thoroughly, removing all old grease and contaminants.
- Apply a thin, even layer of Stan's Biobased Grease to the bearing surfaces, bushings, or parts requiring lubrication.
- For assemblies like headsets or hubs, ensure grease coats all bearings and contact points.
Compatibility:
- Compatible with most bicycle bearing systems (ball bearings, roller bearings).
- Safe for use with rubber seals, O-rings, and elastomer components found in suspension systems, hubs, and pedals.
- Suitable for metal-to-metal contact points.
Care:
- Store the grease in its original container with the lid tightly closed in a cool, dry place.
- Avoid cross-contamination with other types of lubricants.
- Reapply as needed based on riding conditions and component maintenance schedules. For heavily used or frequently wet components, more frequent application may be beneficial.