Howard Products Inc Citrus Shield Paste Wax - CS0014
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for woodworkers, antique restorers, and homeowners seeking to protect and enhance wood finishes. The key benefit is achieving a brilliant, long-lasting shine that highlights natural wood grain. A potential caveat is its versatility; while usable on other surfaces, its primary strength lies in wood care. Howard Products Inc Citrus Shield Paste Wax offers a unique blend of Brazilian carnauba wax, beeswax, and orange oil to beautify and protect various surfaces without silicone or linseed oils.
All features
| Model Part Number | CS0014 |
|---|---|
| Brand | Howard Products Inc |
Extended Product Information
FAQs
Can I use Citrus-Shield on my kitchen countertops?
While it can be used on surfaces like marble and concrete, it's best suited for enhancing and protecting wood finishes. For kitchen countertops, ensure the surface is non-porous and test in an inconspicuous area first. Reapplication will be necessary more frequently due to direct contact with moisture and food.
How often should I reapply Citrus-Shield?
The frequency depends on the surface and its use. For furniture, a reapplication every 3-6 months is common. High-traffic areas like floors might require more frequent attention, possibly every 1-3 months.
Will this product change the color of my wood?
Citrus-Shield is designed to enhance the natural beauty and color of the wood grain. It should not significantly alter the color, but rather enrich its existing tones. Always test on an inconspicuous area first if color change is a concern.
Is Citrus-Shield safe for children's furniture?
Yes, Citrus-Shield contains no silicone or linseed oils and is formulated with natural ingredients like carnauba wax, beeswax, and orange oil. However, always ensure the finish is fully cured and buffed before placing items like children's toys or furniture into regular use.
Can I use this over an existing finish?
Yes, it can be applied over most existing finishes to add shine and protection. Ensure the existing finish is clean and dry. It is not recommended to use over wax-based finishes if they are still heavily present, as it may lead to compatibility issues.
What is the shelf life of Citrus-Shield Paste Wax?
When stored properly in a cool, dry place away from direct sunlight, Citrus-Shield Paste Wax typically has a shelf life of several years. The natural ingredients may settle over time; simply stir or mix before use if separation occurs.
Troubleshooting
Wax appears streaky or uneven
You may have applied the wax too thickly. Apply a thinner coat next time and ensure even distribution. Buff thoroughly to blend any unevenness.
Surface feels sticky after application
The wax may not have fully cured or was applied too heavily. Allow more time to dry and buff vigorously. If the problem persists, remove the wax with a solvent appropriate for the underlying surface and reapply thinly.
Reduced shine after a short period
High-traffic areas or exposure to moisture can wear down the wax. Reapply a fresh coat of Citrus-Shield to restore the shine and protection.
Difficulty buffing to a shine
Ensure the wax has had sufficient time to 'haze' before buffing. Use a clean, soft buffing cloth. If the wax is old or has dried out significantly, a fresh application may be needed.
Pros and Cons
Pros
- Enhances natural wood grain beautifully.
- Provides a durable, high-gloss finish.
- Safe for use on a variety of surfaces beyond wood.
- Free from silicone and linseed oils, preventing future finish issues.
- Easy to apply and buff to a shine.
Cons
- May require more frequent application on high-traffic surfaces compared to synthetic sealers.
- The orange oil scent, while pleasant, may not be preferred by everyone.
- Not intended as a primary sealant for outdoor or extremely wet environments.
Setup, Compatibility & Care
Application: Ensure the surface is clean, dry, and free of dust or old finishes before application. Apply a thin, even coat using a clean, soft cloth. Allow the wax to haze slightly (usually 5-10 minutes, depending on temperature and humidity). Buff to a brilliant shine using a clean, soft cloth or buffing pad. For unfinished wood, apply as directed to achieve a natural finish.
Compatibility: Citrus-Shield is compatible with most finished and unfinished wood surfaces. It can also be used on painted surfaces, concrete, marble, and metal. *Avoid using on surfaces that require a matte finish.* It contains no silicone or linseed oils, making it suitable for pieces that may require refinishing in the future.
Care: Periodically reapply the wax as needed, typically every few months depending on usage and environmental conditions. Clean the surface with a dry or slightly damp cloth. Avoid harsh chemical cleaners, as they can strip the wax layer.