Bartoline Wood Glue - White
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
Bartoline Ready-to-Use Wood Glue is a high-performance, water-resistant adhesive designed for DIY enthusiasts and professionals working on interior wood projects. It excels in delivering rapid bond strength on various materials including MDF, chipboard, and solid wood, making it ideal for kitchens and bathrooms where moisture is a factor. While it offers superior moisture resistance, users should note that full curing to maximum bond strength requires a 24-hour waiting period.
All features
| Colour | White |
|---|---|
| Model Part Number | BA0550 |
| Brand | Bartoline |
Extended Product Information
FAQs
Is this glue safe for food-contact surfaces like cutting boards?
This product is designed for general joinery and furniture; it is not specifically rated for food-safe applications.
Can I use this for outdoor furniture?
While it is D3 water-resistant, it is intended for interior use where moisture contact is occasional rather than continuous exposure to rain.
How long should I leave the clamps on?
While the bond develops rapidly, it is recommended to keep the clamps in place for at least 30 to 60 minutes for initial security.
Does this work on plastics or metal?
No, this adhesive is specifically formulated for wood, MDF, and chipboard applications only.
Can I paint over the dried glue?
Yes, once fully cured, the adhesive can be sanded and painted or varnished.
Troubleshooting
Glue is not setting quickly enough
Ensure the room temperature is above 10°C; cold environments can significantly extend cure times.
Visible white residue on wood joints
This is typically caused by failing to wipe away excess glue with a damp cloth immediately after clamping.
Joint separated after drying
The surfaces were likely not prepped properly (dusty or greasy) or clamped with insufficient pressure during the initial bonding phase.
Pros and Cons
Pros
- Excellent resistance to moisture (D3 rated)
- Dries clear for aesthetic finish
- Suitable for a wide range of wood products
- Rapid initial bond strength development
Cons
- Requires 24 hours for full maximum bond strength
- Not suitable for permanent underwater submersion
- Excess glue must be removed quickly before it sets
Setup, Compatibility & Care
To prepare your surfaces, ensure they are clean, dry, and free from oil or grease. Apply an even bead of glue to both mating surfaces to ensure full coverage. Assemble the joint immediately using firm hand pressure. If working with non-porous or larger components, apply clamps to hold the joint secure. Any squeeze-out must be wiped away instantly with a damp cloth, as the rapid setting time makes removal difficult once the adhesive dries. Store the container in a cool, dry place and ensure the cap is tightly sealed after every use to prevent the glue from thickening or curing inside the bottle.