OB1 Multi-Surface Grip & Grab Adhesive - 290ml (12 Pack)
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This OB1 Multi-Surface Grip & Grab Adhesive is designed for trade professionals and DIY enthusiasts who need a strong, fast-bonding adhesive for a variety of fitting, installation, and repair tasks. Its key benefit is the high-strength, instant grab performance that reduces the need for temporary support, while its caveat is that proper surface preparation is crucial for optimal adhesion. This 290ml cartridge offers a controlled application, and the weatherproof formula ensures durability for both interior and exterior use. The 12-pack format is ideal for those with frequent project needs.
All features
| Brand | OB1 |
|---|
Extended Product Information
FAQs
What surfaces can OB1 Grip & Grab Adhesive be used on?
It bonds to a wide variety of surfaces including wood, plasterboard, brick, concrete, stone, metal, glass, and most plastics.
Is this adhesive suitable for outdoor use?
Yes, its weatherproof formula makes it ideal for both interior and exterior bonding applications.
How long does it take for the adhesive to fully cure?
Full cure times can vary depending on temperature, humidity, and the thickness of the adhesive bead, but typically range from 24 to 48 hours.
Do I need to use a sealant gun?
Yes, the 290ml cartridge is designed for use with a standard sealant gun for controlled application.
Can I use this for structural bonding?
While it offers high strength and instant grab, it is primarily designed for general fitting, installation, and repair tasks where immediate hold is beneficial. For critical structural applications, consult specific product datasheets or engineering advice.
How should I clean up excess adhesive?
Wipe away any wet, uncured adhesive immediately with a damp cloth. Cured adhesive may need to be removed mechanically.
What is the shelf life of the adhesive?
Unopened cartridges stored correctly in a cool, dry place typically have a shelf life of 12-18 months. Refer to the packaging for specific batch information.
Troubleshooting
Adhesive not dispensing
Ensure the cartridge is properly loaded into the sealant gun and the nozzle has been pierced or cut to the desired opening size.
Weak bond or slow setting
Verify that surfaces were clean, dry, and free from dust or grease. Ensure adequate ventilation and appropriate temperature conditions for curing. Check that the correct application method was used.
Adhesive skinning too quickly
This can occur in very warm or humid conditions. Work in smaller sections and apply the adhesive quickly. Ensure the nozzle opening is appropriate for the bead size needed.
Difficulty applying a smooth bead
Adjust the angle of the sealant gun and maintain consistent pressure. Ensure the nozzle opening is cut cleanly and to an appropriate size for the gap being filled.
Pros and Cons
Pros
- Excellent initial grab strength significantly speeds up projects.
- Versatile adhesion for numerous building materials.
- Reliable performance in both indoor and outdoor environments.
- Economical and precise application with the 290ml cartridge.
- Reduces the need for temporary fixings, saving time and effort.
Cons
- Requires thorough surface preparation for optimal bond strength.
- Not suitable for all delicate materials; testing is recommended.
- Curing time may vary depending on temperature and humidity.
- Cartridge format may require a sealant gun for application.
Setup, Compatibility & Care
To set up for use, ensure you have a standard sealant gun, as the 290ml cartridge is designed for use with one. Clean and dry all surfaces thoroughly before application. Remove any dust, grease, oil, or loose material. Apply the adhesive in beads or dots to one surface, depending on the application and weight of the materials being bonded. Press the surfaces firmly together immediately after application. For heavier items, temporary support may still be required until the adhesive fully cures, though the initial grab significantly reduces this need.
Compatibility: This adhesive is suitable for bonding a wide range of materials including wood, plasterboard, brick, concrete, stone, metal, glass, and most plastics. Always test on a small, inconspicuous area first, especially on plastics or painted surfaces, to ensure compatibility and desired finish.
Care: Store cartridges in a cool, dry place away from direct sunlight. Once opened, ensure the nozzle is sealed to prolong the life of the remaining product. Clean up any excess wet adhesive immediately with a damp cloth. Cured adhesive may require mechanical removal.